Bimmerfest - BMW Forums

Bimmerfest - BMW Forums (http://www.bimmerfest.com/forums/index.php)
-   BMW Coding and Programming (http://www.bimmerfest.com/forums/forumdisplay.php?f=175)
-   -   All BMWs Coding 7 series F02 2013? (http://www.bimmerfest.com/forums/showthread.php?t=650519)

fahadcom 10-08-2012 12:45 AM

Coding 7 series F02 2013?
 
2 Attachment(s)
Hi,
I have 2 questions:

1-I'm wondering If Is it possible to code my 7 series 2013 with PSdZ Data v.47.5?
2-Is It possible to activate the acoustic signal for locking/unlocking through coding? I Have the Alarm system (302) it's already Installed, But this option is not appearing in the IDrive.

Thank you in advance,

shawnsheridan 10-08-2012 10:18 AM

Quote:

Originally Posted by fahadcom (Post 7120257)
Hi,
I have 2 questions:

1-I'm wondering If Is it possible to code my 7 series 2013 with PSdZ Data v.47.5?
2-Is It possible to activate the acoustic signal for locking/unlocking through coding? I Have the Alarm system (302) it's already Installed, But this option is not appearing in the IDrive.

Thank you in advance,

1) Yes, you can code you F01 with E-Sys and 47.5 PSdZData.
2) Should be. Code HU_CIC / ACOUSTICAL_LOCK_CONFIRM = aktiv

fahadcom 10-08-2012 10:55 AM

Quote:

Originally Posted by shawnsheridan (Post 7120870)
1) Yes, you can code you F01 with E-Sys and 47.5 PSdZData.
2) Should be. Code HU_CIC / ACOUSTICAL_LOCK_CONFIRM = aktiv

Nice. I will try and i will let you know when I received my ENET Cable next few days...

Thank you

fahadcom 10-15-2012 02:30 AM

Quote:

Originally Posted by shawnsheridan (Post 7120870)
1)
2) Should be. Code HU_CIC / ACOUSTICAL_LOCK_CONFIRM = aktiv

Sorry I have a Noob question
Now the Module is "HU_CIC" right ? what about the Section ? Could u tell me what is the section?

Thank you,

shawnsheridan 10-15-2012 04:52 AM

Quote:

Originally Posted by fahadcom (Post 7134661)
Sorry I have a Noob question
Now the Module is "HU_CIC" right ? what about the Section ? Could u tell me what is the section?

Thank you,

On the F10, it is in 3000 HMI.

It much easier to just use the search window at the top, and paste the value (ACOUSTICAL_LOCK_CONFIRM) into it. It searches Top Down though, so make sure you highlight the very first entry in the ECU before searching, and DO NOT include any trailing spaces after the value.

fahadcom 10-15-2012 05:17 AM

Quote:

Originally Posted by shawnsheridan (Post 7134731)
On the F10, it is in 3000 HMI.

It much easier to just use the search window at the top, and paste the value (ACOUSTICAL_LOCK_CONFIRM) into it. It searches Top Down though, so make sure you highlight the very first entry in the ECU before searching, and DO NOT include any trailing spaces after the value.

Hmmm, I will use the search window. By the way I'm still waiting to receive my ENET cable... :eeps:

shawnsheridan 10-15-2012 05:22 AM

Quote:

Originally Posted by fahadcom (Post 7134752)
Hmmm, I will use the search window. By the way I'm still waiting to receive my ENET cable... :eeps:

These things differ some by chassis, so if you can't find "ACOUSTICAL_LOCK_CONFIRM" exactly, trying searching only on "ACOUSTICAL" or "LOCK", etc.

fahadcom 10-15-2012 05:34 AM

You know. I Tried to activate the acoustic signal for locking/unlocking through my dealer but they replay to me with this.

================
customercare.me@bmw.com
Oct 3 (12 days ago)

to me, frank.zauner
Dear Mr. Alibrahim,

Thank you for your email which was forwarded to us from BMW in Munich.

Kindly be informed that the Acoustic signal for locking and unlocking cannot be retrofitted. The video shows that the car is from the US market where this system is available but not in the European market. The alarm system mentioned in your email is an anti theft alarm. In the European specification, only the visual indication for locking and unlocking is available.

If you have any further enquiries, please do not hesitate to contact us.


With kind regards,

Jaxeena Mahesh

----------------------------------------------
BMW Group Middle East
Jaxeena Mahesh
Customer Care
Phone: +971-4-3132-651
Fax: +971-4-3300-126
mailto: customercare.me@bmw.com
Url: http://www.bmw-me.com
----------------------------------------------
===================================

Hope that's I can activate this option through coding :typing:

shawnsheridan 10-15-2012 05:42 AM

Quote:

Originally Posted by fahadcom (Post 7134772)
You know. I Tried to activate the acoustic signal for locking/unlocking through my dealer but they replay to me with this.

================
customercare.me@bmw.com
Oct 3 (12 days ago)

to me, frank.zauner
Dear Mr. Alibrahim,

Thank you for your email which was forwarded to us from BMW in Munich.

Kindly be informed that the Acoustic signal for locking and unlocking cannot be retrofitted. The video shows that the car is from the US market where this system is available but not in the European market. The alarm system mentioned in your email is an anti theft alarm. In the European specification, only the visual indication for locking and unlocking is available.

If you have any further enquiries, please do not hesitate to contact us.


With kind regards,

Jaxeena Mahesh

----------------------------------------------
BMW Group Middle East
Jaxeena Mahesh
Customer Care
Phone: +971-4-3132-651
Fax: +971-4-3300-126
mailto: customercare.me@bmw.com
Url: http://www.bmw-me.com
----------------------------------------------
===================================

Hope that's I can activate this option through coding :typing:

That is true that the anti theft alarm is needed. I don't know if you have it or not. Maybe you have it, and it is not enabled. To enable it too, set HU_CIC/ 3000 HMI / DWA = aktiv

fahadcom 10-15-2012 06:34 AM

Yes I'm sure, I have the Alarm system "anti theft alarm" Code (S302A). And it's working. But the option for acoustic signal for locking/unlocking is not showing in the IDrive :)

shawnsheridan 10-15-2012 06:37 AM

Quote:

Originally Posted by fahadcom (Post 7134870)
Yes I'm sure, I have the Alarm system "anti theft alarm" Code (S302A). And it's working. But the option for acoustic signal for locking/unlocking is not showing in the IDrive :)

Then you should be good to go.

fahadcom 10-22-2012 04:51 AM

Finally I activated the acoustic signal for locking/unlocking successfully, But the sound signal is coming only from the right corner of the rear bumper. In fact I don't know if it's normal or not. :eek:

I also successfully coded:
1-Disable seat belt reminder - driver.
2-Sets car's Auto Start/Stop function to start in the last used setting.
3-Speed limit information.
4-Disable TV and DVD Speedlock.

Thank you shawnsheridan

cuorealfa1 10-22-2012 09:38 AM

Quote:

Originally Posted by fahadcom (Post 7149752)
Finally I activated the acoustic signal for locking/unlocking successfully, But the sound signal is coming only from the right corner of the rear bumper. In fact I don't know if it's normal or not. :eek:

I also successfully coded:
1-Disable seat belt reminder - driver.
2-Sets car's Auto Start/Stop function to start in the last used setting.
3-Speed Limit Display.
4-Disable TV and DVD Speedlock.

Thank you shawnsheridan


how did you get the acc. signal coded? with "ACOUSTICAL_LOCK_CONFIRM" ?

because i had to code:

FZD/3002/Akkustische Quittierung Schaerfen
FZD/3002/Akkustische Quittierung Schaerfen mit Klappenbetrachtung
FZD/3002/Akkustische Quittierung Entschaerfung
FZD/3002/Lautstaerke Akk. Quitt. tageszeitabhaengig

Regards

fahadcom 10-22-2012 10:38 AM

Quote:

Originally Posted by cuorealfa1 (Post 7150290)
how did you get the acc. signal coded? with "ACOUSTICAL_LOCK_CONFIRM" ?

because i had to code:

FZD/3002/Akkustische Quittierung Schaerfen
FZD/3002/Akkustische Quittierung Schaerfen mit Klappenbetrachtung
FZD/3002/Akkustische Quittierung Entschaerfung
FZD/3002/Lautstaerke Akk. Quitt. tageszeitabhaengig

Regards

Yes with "ACOUSTICAL_LOCK_CONFIRM"

cuorealfa1 10-22-2012 11:30 AM

strange... what are your values then in the settings above? in the CAFD of FZD?

Is your checkbox now functional?

fahadcom 10-22-2012 11:40 AM

NO it's not in CAFD of FZD, As i remember it was on HU_BNT or something like that "use the search window" , Any way I will check for you tomorrow, sorry ....

fahadcom 10-23-2012 01:01 AM

Quote:

Originally Posted by cuorealfa1 (Post 7150553)
strange... what are your values then in the settings above? in the CAFD of FZD?

Is your checkbox now functional?

Yes I checked today in my car it was in HU_BNT As I told you. About the checkbox in Idrive yes it's functional.
Be sure that you have the Alarm system "anti theft alarm" Code (S302A). If you don't know check out this web: http://bmwvin.com/

cuorealfa1 10-23-2012 01:43 AM

dear fahadcom

my signal is working, but i did code it with these settings to set "aktiv":

FZD/3002/Akkustische Quittierung Schaerfen
FZD/3002/Akkustische Quittierung Schaerfen mit Klappenbetrachtung
FZD/3002/Akkustische Quittierung Entschaerfung
FZD/3002/Lautstaerke Akk. Quitt. tageszeitabhaengig


the "ACOUSTICAL_LOCK_CONFIRM" is just the checkbox in the CIC. Which i also coded now and really good to have, for some reasons when you have to shut of the signal.

my question was, what are your entries in FZD to see if these settings have to be on "aktiv" or not for the signal functionality.

Thank you.

fahadcom 10-23-2012 02:00 AM

Actually I don't know what you mean by FZD, because I'm new in coding. But what i did I brows "HU_BNT" then search for "ACOUSTICAL_LOCK_CONFIRM" then chose edit then I chose "aktiv" after saveing this setting, I started the Idrive I put a check mark on acoustic signal for locking/unlocking. That's it

cuorealfa1 10-23-2012 02:37 AM

what i mean is:

In the ECU "FZD" there are these settings:

FZD/3002/Akkustische Quittierung Schaerfen
FZD/3002/Akkustische Quittierung Schaerfen mit Klappenbetrachtung
FZD/3002/Akkustische Quittierung Entschaerfung
FZD/3002/Lautstaerke Akk. Quitt. tageszeitabhaengig

what would be nice to know is, if the settings were already on status "aktiv" or if they are "nicht aktiv" but the singal works anyway.

fahadcom 10-23-2012 02:39 AM

Quote:

Originally Posted by cuorealfa1 (Post 7151900)
what i mean is:

In the ECU "FZD" there are these settings:

FZD/3002/Akkustische Quittierung Schaerfen
FZD/3002/Akkustische Quittierung Schaerfen mit Klappenbetrachtung
FZD/3002/Akkustische Quittierung Entschaerfung
FZD/3002/Lautstaerke Akk. Quitt. tageszeitabhaengig

what would be nice to know is, if the settings were already on status "aktiv" or if they are "nicht aktiv" but the singal works anyway.

It was "nicht aktiv"


All times are GMT -7. The time now is 01:52 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
© 2001-2011 performanceIX, Inc. All Rights Reserved .: guidelines .:. privacy .:. terms