Bimmerfest - BMW Forums

Bimmerfest - BMW Forums (
-   E36/7 Z3 (1996-2002) (
-   -   Z3 Roadster (E36/7) New Member (

rrdogface 10-10-2012 05:26 PM

New Member
1 Attachment(s)
Posted in the main area yesterday, but should have posted here. Here is my 1997 Z3. I have added a chrome cold air intake, removed the fog lights and made custom grills instead, and changed the center grill to a black mesh style. I added a front lip and painted rear wing as well as a polished Magnaflow muffler. I have a performance clutch with solid cast flywheel.

crappyattitude1 10-11-2012 04:59 AM

To the Forum. Take some pix of your modifications.. (except the clutch :) ) It would be interesting to see what you have done.

Crappy : )

(Just outside of Nashville)

dougmcintyre 10-11-2012 05:17 AM

Welcome to the forum. Always nice to see another NC person on the forum.

DeathFromAbv 10-17-2012 08:15 AM

Pretty! Welcome!

Skiddish 10-17-2012 10:55 AM

You should watch your rear in there sir! If that attachment is indeed your own Z3. That rear camber is gonna come back and bite one of these days. To be honest with it, you might just want to look at replacing your rear shocks, that's what's done the trick for me.

Welcome to the forum bud, hope you enjoy.

(North Texas).

rrdogface 10-17-2012 05:22 PM

rear camber
Actually the car photo was taken by a photographer with a lens that distorted the whole car. Notice how long the front end looks also. This was at a Carolina Super Cars event. (They have a website with photos of our members, some expensive cars in the club). A print shop made posters of the cars. This photo is mine.

demon 05-21-2017 03:13 PM

What kind of front lip did you get and where did you get it? Wanted to do the same on my Z3.

KBH22102 05-22-2017 10:55 AM

The OP hasn't been on the forum in four years so I doubt you will get a response. My guess is that is it a generic lip like All-Fit

All times are GMT -7. The time now is 08:09 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
© 2001- VerticalScope Inc. All rights reserved.