Parting out M5/M6 E60/E63 S85 engine
 

Parting out M5/M6 E60/E63 S85 engine with only 32k miles, let me know if you want pics of a specific part.

Cylinder head cover + profile Gasket ZYL. 1-5
Cylinder head cover + profile Gasket ZYL. 6-10
Control unit for ionic current
AT-adjustment unit (VANOS) ZYL. 1-5 + solenoids
AT-adjustment unit (VANOS) ZYL. 6-10 + solenoids
Vanos Oil line + connecting line
Vanos High-pressure pump + GEAR wheel + Sprocket
PRESSURE ACCUMULATOR ( bracket available )
TIMING CHAIN
Vanos gearbox, inlet
Vanos gearbox, outlet
Adjusting pulley with lever with Belt tensioner
Connecting rod
Connecting rod + piston and rings
set of piston Rings
Flywheel
Clutch
Vibration damper
INLET CAMSHAFT
CAMSHAFT EXHAUST
Camshaft sensor
Oil pump + suction pipe
Oil sump pump
Engine wiring harness
Actuator Idle control device
Fuel INJECTION TUBE + 10 fuel injectors
Throttle Housing Assy + Hall sensor
Thermostat housing + thermostat
Connector ZYL. 1-5
Connector ZYL. 6-10

I also have the cylinder heads.

I also have many hoses and lines, let me know what u need and Ill check.

I need an intake Manifold adjuster I believe the part number is 11617544805
It is the box on the manifold on the drivers side
Thank you

I can't find it with the part# u gave me. if you can find it on realoem.com, send me the part# so i can check if I have it. Thanks

bump

Mass Air Flow?

you have the stock headers? how much for the set of 10 throttle bodys? price for each shipped to 94601

bump

ist of whats left:

Cylinder head cover + profile Gasket ZYL. 1-5

Cylinder head cover + profile Gasket ZYL. 6-10

Control unit for ionic current

AT-adjustment unit (VANOS) ZYL. 1-5 + solenoids

AT-adjustment unit (VANOS) ZYL. 6-10 + solenoids

Vanos Oil line + connecting line

PRESSURE ACCUMULATOR ( bracket available )

TIMING CHAIN

Vanos gearbox, inlet

Vanos gearbox, outlet

Adjusting pulley with lever with Belt tensioner

Connecting rod

Connecting rod + piston and rings

set of piston Rings

Flywheel

Clutch

Vibration damper

INLET CAMSHAFT

CAMSHAFT EXHAUST

Camshaft sensor

Oil pump + suction pipe

Engine wiring harness

Fuel INJECTION TUBE + 10 fuel injectors

Throttle Housing Assy + Hall sensor

Thermostat housing + thermostat

Connector ZYL. 1-5

Connector ZYL. 6-10

oil level sensor

I also have the cylinder heads.

I also have many hoses, vanos hoses and lines,

bump