JB Racing flywheel and Clutchmaster FX300 clutch
 

The setup has about 7000 miles of only a few runs at the track. Almost entirely street driven. Retail is around $1300 plus shipping - I will take $500 plus shipping - OBO

http://i225.photobucket.com/albums/d...2/STU_1273.jpg

http://i225.photobucket.com/albums/d...2/STU_1274.jpg

http://i225.photobucket.com/albums/d...2/STU_1275.jpg

http://i225.photobucket.com/albums/d...2/STU_1276.jpg

http://i225.photobucket.com/albums/d...2/STU_1277.jpg

http://i225.photobucket.com/albums/d...2/STU_1278.jpg

http://i225.photobucket.com/albums/d...2/STU_1279.jpg

http://i225.photobucket.com/albums/d...2/STU_1280.jpg

From the JB Racing website:

Fitment:
3/03 - 06 E46 325i, 330i w/ M54 2.5L, 3.0L - 6 cyl., 6-spd. only
Note: Above models equip w/ 6-speedZF manual transmission
Lightweight Aluminum flywheel replaces stock dual-mass flywheel. Accepts OEM clutch/pressure plate/throw-out bearing components as well as performance aftermarket direct replacements. Will also accept many aftermarket sprung-hub clutch discs. Provides improved throttle response and increased performance.
Note: Flywheel includes the hub mounted pilot bearing necessary for 6-speed transmission input shafts.

520-190-240 Clutch Diameter: 240mm OEM Flywheel Wt. 25.0 lbs.
List Price $722.50 Alum. Flywheel Wt. 10.5 lbs.
Order JBR p/n 520-190-240 Price: $595.00


From the ClutchMasters site:

Clutch or Flywheel Details
BMW > 330I > 3.0L E46 6 Speed > 03051-HDTZ-R
Stage: 3 > Years: 2003-2006 > Price: $895.00 >


(File photo for reference only.)
FX300 (Stage III)

· Heavy-duty street & racing system
· Holding capacity 110% over stock
· Heavy-Duty reinforced pressure plate
· Hi-Leverage™ pressure ring design
· Sprung hub/cushioned disc
· Steel backed Segmented Carbon/Kevlar

--------------------------------------------------------------------------------
All Clutch Masters clutch kits come complete with:
Pressure Plate
Clutch Disc
Throw-out Bearing (when applicable)
Pilot Bearing or Bushing (when applicable)

Is that ONLY for 6cyl motors or do you believe it will fit on a 1999 E39 540i6. I'm looking for a lightweight flywheel myself.

I do not know - but my hunch is that it only works with non M 6 cyl - but you could look up the part numbers on each site and verify

bump

Bump