Bimmerfest - BMW Forums

Bimmerfest - BMW Forums (
-   E30 (1982 - 1993) (
-   -   Replacing driveshaft (

E30949/909 11-07-2012 08:22 PM

Replacing driveshaft
90 325ic question is the driveshaft removal an new installation of csb, guibo, an putting on new driveshaft a easy diy?

hornhospital 11-07-2012 09:09 PM

If you have a lift, yes. Laying on the ground with the car on jack stands, not so much.

Nick323 11-08-2012 12:19 AM

Ah the Jack stands, or bricks...
It is always an enlightening experience to be groveling aroubnd under your pride & joy (almost like marriage, except you can just walk away when you have enough) to suddenly find a heavy part (such as a CSB) crashing into your nether regions ;)
But I would think that this procedure is still well within the home DIY category, as long as you think it through beforehand and take the neccesay safety precautions ahead of time :thumbup:

E30949/909 11-08-2012 08:07 AM

Lol thanks for the advice

tim96 11-08-2012 11:27 AM

I did it to mine recently pretty easy
Except for I have long arms and did it jackstands so it was a bit cramped
Have a look at that link above as a guide
If you are putting in a new driveshaft that might be a bit tricky to get it balanced right etc
Take your time and do it slow

Interesting what nick said above makes me think I am not the only one who sees working on my car as some sort of ritual/ceremony and sometimes when under the car I just lie there thinking and looking around I hate working on my car fast because I don't feel it

BMWFatherFigure 11-08-2012 06:17 PM

Almost Zen..... I usually curse a lot at the car and life in general half way through. BUt at the end its almost like sex (without having to apologise).

All times are GMT -7. The time now is 03:44 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
© 2001- VerticalScope Inc. All rights reserved.