Bimmerfest - BMW Forums

Bimmerfest - BMW Forums (http://www.bimmerfest.com/forums/index.php)
-   Tools and Miscellaneous (http://www.bimmerfest.com/forums/forumdisplay.php?f=95)
-   -   All BMWs ****** RTAB, FCAB, vanos, peake tools, shim kits, etc (http://www.bimmerfest.com/forums/showthread.php?t=660127)

nitro3421 11-24-2012 02:53 PM

****** RTAB, FCAB, vanos, peake tools, shim kits, etc
 
BMW tools for ****** RTAB, FCAB, vanos/timing, peake tools, shim kits, etc.

Iíve accumulated several BMW tools over the years from owning several BMWs and Iím offering them to loan. Theyíre a rip off to buy for a one time use, so hereís an opportunity to get the job done with the right tool.

-Vanos/timing tools
-RTAB (rear trailing arm bushing) tool
-FCAB (Front control arm bushing) tool
-Peake SRS tool
-Peake scan tool
-e46 M3 valve adjustment kit (shims, pick up tool, micrometer, 32m wrench)

The details of each tool are listed below


-RTAB tool. Loan includes both the removal tool as well as the installer tool. $25 outgoing shipping/handling. You are responsible for return shipping. $100 fully refundable deposit required in case of damage.

http://i400.photobucket.com/albums/p...photo1-1-5.jpg
http://i400.photobucket.com/albums/p...8/IMG_2680.jpg

-FCAB tool. Loan includes both the removal tool as well as the installer tool. $25 outgoing shipping/handling for 7 day loan once tool arrives. You are responsible for return shipping. $120 fully refundable deposit required in case of damage.
Works on: e30, e36, e46 as well as 60mm on earlier 323 & 328 models.

http://i400.photobucket.com/albums/p...8/photo4-5.jpg
http://i234.photobucket.com/albums/e...9305926607.png


-FCAB Lollypop Tool. This tool allows you to remove and reinstall the FCAB into the lollypop/bushing carrier without the use of a 6 ton shop press. Loan includes both the removal tool as well as the installer tool. $25 outgoing shipping/handling for 7 day loan once tool arrives. You are responsible for return shipping. $100 fully refundable deposit required in case of damage. Works on:
E30, E36, E46 (60mm only on 323/328/M3, and Z3 lollypops.

http://i234.photobucket.com/albums/e...2626911907.png
http://i234.photobucket.com/albums/e...1780291660.png
http://i234.photobucket.com/albums/e...1/8df49c50.jpg

-Vanos/timing tools: See picture for specific engine applications. Loan includes camshaft locking block, sprocket turner, crankshaft lock pin, camshaft tensioner lock pin. $25 outgoing shipping/handling for 7 day loan once tool arrives. You are responsible for return shipping. $120 refundable deposit required in case of damage.

-The other Vanos tools (32 mm open wrench, fan clutch holder, & 17/18 MM modified sockets are available for an extra $10 shippping/handling (requires the next size larger flat rate shipping box). No additional deposit required if loaned with other tools.

For the following motors (will not fit an s54):
-M42
-M44
-M50
-M52
-M54
-M56
-S50
-S52
http://i400.photobucket.com/albums/p...photo2-1-5.jpg
http://i400.photobucket.com/albums/p...8/photo3-8.jpg
http://i234.photobucket.com/albums/e...1/34974edb.jpg

-E46 Rear Differential Bushing Tool: $25 outgoing shipping/handling for 7 day loan once tool arrives + $100 fully refundable deposit. For non-M vehicles only. This tool allows removal and installation of the bushing. You are responsible for return shipping.
http://i234.photobucket.com/albums/e...1792090376.png
http://i234.photobucket.com/albums/e...1858866640.png
http://i234.photobucket.com/albums/e...1/e8510c68.jpg



-Peake R5/FX-3 (scanner & reset tool): $25 outgoing shipping/handling for 7 day loan once tool arrives + $130 fully refundable deposit. You are responsible for return shipping.

http://www.peakeresearch.com/fcx3.htm

http://i234.photobucket.com/albums/e...1/IMG_2373.jpg


-Peake R5/SRS-2 (airbag tool): $25 outgoing shipping/handling for 7 day loan once tool arrives + $130 fully refundable deposit. For 2001 and older vehicles only. Outgoing shipping is $5. You are responsible for return shipping.

http://www.peakeresearch.com/srstool.htm

http://i234.photobucket.com/albums/e...1/IMG_2372.jpg


-AB03 Adapter: Comes with the loan with one of the above loans. Allows use of above tools with older style under hood connection.
http://i234.photobucket.com/albums/e...1/IMG_2374.jpg


-e46 M3 adjustment kit: $50 outgoing insured shipping/handling for 7 day loan once tool arrives + $550 fully refundable deposit. You must replace shims with OEM units from the dealer prior to sending it back. You are responsible for return shipping (around $15 with insurance). If you only want the shim kit and pick up tool, subtract $10 from the shipping/handling cost & subtract $150 from the deposit.

http://i234.photobucket.com/albums/e...1/cfcfd1dc.jpg
http://i234.photobucket.com/albums/e...1/c5871126.jpg
http://i234.photobucket.com/albums/e...1/fc56f5ed.jpg

Steveo 11-27-2012 11:36 AM

This is such great news! I'll get back to you in early January to rent the valve shim kit. Thanks!

Steveo 03-06-2013 12:35 PM

Need to Rent E46 Shim Kit Only
 
Is this rig still available for rent? I only need the shim kit - have the tool and micrometer.
How much, and how do you handle the money? Paypal? When can you ship to the Seattle area? Thanks.
Steve


All times are GMT -7. The time now is 10:34 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
© 2001-2011 performanceIX, Inc. All Rights Reserved .: guidelines .:. privacy .:. terms