Bimmerfest - BMW Forums

Bimmerfest - BMW Forums (http://www.bimmerfest.com/forums/index.php)
-   X5 E53 (1999 - 2006) (http://www.bimmerfest.com/forums/forumdisplay.php?f=22)
-   -   DSC light on. steering angle sensor fauly? or dealer is dump! (http://www.bimmerfest.com/forums/showthread.php?t=661687)

goldenbird 12-02-2012 04:25 AM

DSC light on. steering angle sensor fauly? or dealer is dump!
 
While stationery and immediately after doing some coding, the 4x4 bulb comes on. the error code was something related to SAS not receiving power. The mechanic told me there might be a misconnection in the wiring or the sensor itself is faulty. he tested and find out no wiring problem and concluded that the sas have 2b replaced. I am not convinced.as he told me he cannot reset the error code !!! He tried then the lock to lock calibration and it didn't work. I searched for that fault code involving sas not powered or no output and could not find the related code. I wanted to concentrate my research based on that exact code bcs most thread I've read was not based on a specific DCS error code. Looking for any helpful info

goldenbird 12-03-2012 12:54 AM

ok since no one answered. I believe my mechanic is not dump but he missed some test action before presuming that sas need replacing

TRIPLE_O 12-04-2012 09:43 AM

What other errors were there? Is it a chassis stabilization error? What kind of coding did you do? Was the car running or just on? Please provide more details.

Quote:

Originally Posted by goldenbird (Post 7226219)
While stationery and immediately after doing some coding, the 4x4 bulb comes on. the error code was something related to SAS not receiving power. The mechanic told me there might be a misconnection in the wiring or the sensor itself is faulty. he tested and find out no wiring problem and concluded that the sas have 2b replaced. I am not convinced.as he told me he cannot reset the error code !!! He tried then the lock to lock calibration and it didn't work. I searched for that fault code involving sas not powered or no output and could not find the related code. I wanted to concentrate my research based on that exact code bcs most thread I've read was not based on a specific DCS error code. Looking for any helpful info



All times are GMT -7. The time now is 12:38 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
© 2001-2011 performanceIX, Inc. All Rights Reserved .: guidelines .:. privacy .:. terms