Bimmerfest - BMW Forums

Bimmerfest - BMW Forums (http://www.bimmerfest.com/forums/index.php)
-   E63 / E64 6 Series (2004 - 2010) (http://www.bimmerfest.com/forums/forumdisplay.php?f=114)
-   -   coding HUD (http://www.bimmerfest.com/forums/showthread.php?t=661689)

mjposner 12-02-2012 05:01 AM

coding HUD
 
Does anyone know if the 2009 HUD can be coded to show the turn signals? I saw that the '12 could be done this way. I keep my steering wheel low and it blocks the side view so I some times pull a blue hair.

rebel.ranter 12-02-2012 05:25 AM

Yes, that's possible:


Module: HUD
Parameter: BLINKER_AUSSTATTUNG
Setting change required: nicht_aktiv -> aktiv

Result: Turn signals in HUD

There are additional HUD changes possible too:


HUD:
M_SPORT_HUD. -> aktiv
M5 HUD - shows RPM bar and current gear (all three needs to be enabled for Mview to work in HUD settings)

CAPPL:
HUD_M -> aktiv
M5 HUD - shows RPM bar and current gear (all three needs to be enabled for Mview to work in HUD settings)

CAPPL:
MDrive -> aktiv
M5 HUD - shows RPM bar and current gear (all three needs to be enabled for Mview to work in HUD settings)

houbmw-cm 12-02-2012 09:41 AM

As Rebel stated ye it can be. It is a very nice feature to add to the HUD since the turn signals are behind the steering wheel. I foudn this feature to be very useful. Hopefully you can find someone to help you get setup for coding. It is a chore to setup, but once you have it setup, the coding part os pretty simple.

Good luck.

mjposner 12-02-2012 11:56 AM

As I only have a 650i I can't get the sweet M stuff. I also want to turn off seat belt chime (every morning, bong bong while I get situated, I wear them I swear), lawyer screen on nav, sport mode on by default if possible

rebel.ranter 12-02-2012 02:24 PM

You should be able to enable the M elements in your HUD, there's only one HuD hardware & it is coded according to the car it is fitted to. Similarly the MDrive menu can be enabled in any iDrive system but it doesn't do anything, you can select P400, P500, P500 Sport but it does nothing. I think the HUD functions do work though.

As for Sport mode on by default, I don't think this is possible. You might be able to make up a circuit that provides a momentary pulse of positive (or negative, would have to check that) power supply to the back of the Sport switch at start up. There is no code to do it anyway

Legal Disclaimer remove
Module: CAPPL/MASK
Parameter: LEGAL_DISCL
Change required: aktiv -> nicht_aktiv

Seat Belt chime remove
Module: ABG & SGM (2 modules for total disable, just disable ABG if you want it to bong just twice)
Parameter:
SBR_BEIFAHRER_ACSM (Driver)
SBR_FAHRER_ACSM (Passenger)
Change required:
aktiv -> nicht_aktiv

Video in Motion
Module: CAPPL
Parameter: VIDEO_DENY_C0B
Change required: deny_slow_key -> deny_never

There's tonnes of changes on top of this that can also be done like adding a digital speedo

Mulchman 12-03-2012 10:14 AM

Quote:

Originally Posted by rebel.ranter (Post 7226943)
You should be able to enable the M elements in your HUD, there's only one HuD hardware & it is coded according to the car it is fitted to. Similarly the MDrive menu can be enabled in any iDrive system but it doesn't do anything, you can select P400, P500, P500 Sport but it does nothing. I think the HUD functions do work though.

As for Sport mode on by default, I don't think this is possible. You might be able to make up a circuit that provides a momentary pulse of positive (or negative, would have to check that) power supply to the back of the Sport switch at start up. There is no code to do it anyway

Legal Disclaimer remove
Module: CAPPL/MASK
Parameter: LEGAL_DISCL
Change required: aktiv -> night_aktiv

Seat Belt chime remove
Module: ABG & SGM (2 modules for total disable, just disable ABG if you want it to bong just twice)
Parameter:
SBR_BEIFAHRER_ACSM (Driver)
SBR_FAHRER_ACSM (Passenger)
Change required:
aktiv -> nicht_aktiv

Video in Motion
Module: CAPPL
Parameter: VIDEO_DENY_C0B
Change required: deny_slow_key -> deny_never

There's tonnes of changes on top of this that can also be done like adding a digital speedo


All true. My car is a 650i (2007) and I have the M HUD option coded. Blinkers are great as well. But, I don't get the gear in my HUD :banghead: Guess I need to go check this out when I get home.

Ranter - Can my car show video? and do you know the module/command to unlock doors when put it in Park or kill motor?

Thanks

rebel.ranter 12-03-2012 12:25 PM

Quote:

Originally Posted by Mulchman (Post 7228350)
Ranter - Can my car show video? and do you know the module/command to unlock doors when put it in Park or kill motor?
Thanks

Unlock Doors:
Module: CAS
Parameter: ER_KEYOUT_AUTOVR
Change: nicht_aktiv -> aktiv
(Note if someone opens a door prematurely the other door/trunk will not auto unlock)

Another useful one is being able to press & hold Start/Stop button to pop key out:
Module: CAS
Parameter: KOMFORT_EJECT
Change: nicht_aktiv -> aktiv

As for playing video? What would the source be? There is a code to enable reverse camera if you have a CIC or CCC, maybe you could use that feed? Another option is to install the Dension system.

Mulchman 12-04-2012 04:05 AM

Quote:

Originally Posted by rebel.ranter (Post 7228618)
Unlock Doors:
Module: CAS
Parameter: ER_KEYOUT_AUTOVR
Change: nicht_aktiv -> aktiv
(Note if someone opens a door prematurely the other door/trunk will not auto unlock)

Another useful one is being able to press & hold Start/Stop button to pop key out:
Module: CAS
Parameter: KOMFORT_EJECT
Change: nicht_aktiv -> aktiv

As for playing video? What would the source be? There is a code to enable reverse camera if you have a CIC or CCC, maybe you could use that feed? Another option is to install the Dension system.

Thanks for those. I will do them this morning.

I was hoping for DVD playback. I've read threads that say it is possible and seen many that say you need a CIC.

TRIPLE_O 12-04-2012 09:47 AM

Unfortunately your car doesn't support DVD playback from factory.

Quote:

Originally Posted by Mulchman (Post 7229815)
Thanks for those. I will do them this morning.

I was hoping for DVD playback. I've read threads that say it is possible and seen many that say you need a CIC.


pablo645 12-04-2012 05:09 PM

I will have to try some of these one of these days :D. Since I got my PC and NSExpert working I haven't had time to do anything like this. The HUD change does seems interesting and would be handy for me to do as well. I may have to reach out to some of you experts when i'm ready :thumbup:

greco2000 12-06-2012 09:55 AM

Just had some coding done for me today. Did the HUD turn signal, roll up window with key fob and anger eye led code delete.

tomtebloss 01-22-2016 04:04 AM

Quote:

Originally Posted by rebel.ranter (Post 7226270)
Yes, that's possible:


Module: HUD
Parameter: BLINKER_AUSSTATTUNG
Setting change required: nicht_aktiv -> aktiv

Result: Turn signals in HUD

There are additional HUD changes possible too:


HUD:
M_SPORT_HUD. -> aktiv
M5 HUD - shows RPM bar and current gear (all three needs to be enabled for Mview to work in HUD settings)

CAPPL:
HUD_M -> aktiv
M5 HUD - shows RPM bar and current gear (all three needs to be enabled for Mview to work in HUD settings)

CAPPL:
MDrive -> aktiv
M5 HUD - shows RPM bar and current gear (all three needs to be enabled for Mview to work in HUD settings)

I LOVE YOU !! /From Sweden!

rebel.ranter 01-22-2016 02:41 PM

Quote:

Originally Posted by tomtebloss (Post 9489760)
I LOVE YOU !! /From Sweden!

Thanks! ........I think:rofl:

tomtebloss 01-22-2016 07:11 PM

Quote:

Originally Posted by rebel.ranter (Post 9490734)
Thanks! ........I think:rofl:

Its abit funny. I got a 530d and my rpm only goes to 4500rpm before shifting. 4500 rpm is like lower than middle on the hud rpm haha. Abit fail :)

KwlAznKid 01-23-2016 01:04 PM

damn i wish i had HUD for this, i always have trouble seeing the blinkers, they are placed horribly

tomtebloss 01-23-2016 01:44 PM

Quote:

Originally Posted by KwlAznKid (Post 9492021)
damn i wish i had HUD for this, i always have trouble seeing the blinkers, they are placed horribly

I wish i had cup holders ;)

haha:cry:

rebel.ranter 01-23-2016 03:36 PM

Quote:

Originally Posted by tomtebloss (Post 9491070)
Its abit funny. I got a 530d and my rpm only goes to 4500rpm before shifting. 4500 rpm is like lower than middle on the hud rpm haha. Abit fail :)

The unfortunate problem is you are missing 4 cylinders to allow the Rev counter in HUD to register correctly.

tomtebloss 01-23-2016 04:15 PM

Quote:

Originally Posted by rebel.ranter (Post 9492215)
The unfortunate problem is you are missing 4 cylinders to allow the Rev counter in HUD to register correctly.

I really think its because m5 e60 revs to 8500 rpm and my diesel revs to 4500rpm

rebel.ranter 01-24-2016 01:34 AM

Quote:

Originally Posted by tomtebloss (Post 9492258)
I really think its because m5 e60 revs to 8500 rpm and my diesel revs to 4500rpm

Sorry, I was saying that in a very round about way. I have an M6, the rev limit is 8250rpm.

happythanh 06-24-2016 08:30 PM

hello everyone,

I tried to code my 2007 E70 4.8i to show the RPM bar and current gear on HUD but it only shows the RPM bar but not the current gear, it only show the gear when I switch to Manual gear.

besides I do not see the Menu CAPPL as per the guide below:

/quoted/

HUD:
M_SPORT_HUD. -> aktiv
M5 HUD - shows RPM bar and current gear (all three needs to be enabled for Mview to work in HUD settings)

CAPPL:
HUD_M -> aktiv
M5 HUD - shows RPM bar and current gear (all three needs to be enabled for Mview to work in HUD settings)

CAPPL:
MDrive -> aktiv
M5 HUD - shows RPM bar and current gear (all three needs to be enabled for Mview to work in HUD settings)
/quoted/

6 Five-O 06-25-2016 10:47 AM

I'd be very interested to know how to show the gear on the HUD with an SMG. Any one done this?

roseng 06-25-2016 03:23 PM

Quote:

Originally Posted by 6 Five-O (Post 9732890)
I'd be very interested to know how to show the gear on the HUD with an SMG. Any one done this?

I have not but, try BMWCoding.com or the M5 forum M5 and M6 sections.


All times are GMT -7. The time now is 05:10 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
© 2001-2015 performanceIX, Inc. All Rights Reserved .: guidelines .:. privacy .:. terms