Bimmerfest - BMW Forums

Bimmerfest - BMW Forums (http://www.bimmerfest.com/forums/index.php)
-   F10 / F11 (2011 - Current) (http://www.bimmerfest.com/forums/forumdisplay.php?f=141)
-   -   Coding Error Message (http://www.bimmerfest.com/forums/showthread.php?t=662020)

VBnNC 12-03-2012 04:42 PM

Coding Error Message
 
My car just recently had a software update at the dealership for a cold start issue, however it reset all of the coding I'd previously done back to the factory settings. Now when I try making changes in CAFD in the FRM module for example, as well as other modules that I've coded before, I get the following error message when I select "Read coding Data":

Transaktions-Report: Aktion: Codierdaten lesen
FRM [72] [C807783]
readCPS o.k.
cafd_0000012f-012_003_011 Fehler:
File for "cafd_0000012f-012_003_011" not found! [C012]

I tried making a change to the CAS module, which I've never made any coding changes & did not get an error message. I was able to code in the module.

Anyone else encountered this problem?

Chuck W. 12-03-2012 05:43 PM

I had a problem with coding after the globe update. Go to the coding forum and there is a lot of info there. Good luck.

http://www.bimmerfest.com/forums/forumdisplay.php?f=175

TRIPLE_O 12-04-2012 09:52 AM

Get the latest psdzdata files and you should be ok.


All times are GMT -7. The time now is 01:09 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
© 2001-2011 performanceIX, Inc. All Rights Reserved .: guidelines .:. privacy .:. terms