Bimmerfest - BMW Forums

Bimmerfest - BMW Forums (
-   E36/7 Z3 (1996-2002) (
-   -   Z3 Fan switch oring? (

grecken 12-07-2012 10:52 AM

Z3 Fan switch oring?
Replacing my radiator and just removed the fan switch and there was no oring. Should there be? The Bently manual says to replace the oring. Thanks

2000 Z3 2.3 with 2.5l motor.

Blacklane 12-07-2012 12:31 PM shows one. PN 32411093596

They also show the dimensions (A14x20), so you might be able to find one locally.

grecken 12-08-2012 04:28 AM

Thanks for the reply, Blacklane. Realoem shows one on the 2.8 nd 1.9, but not on my specific motor. I was told by an online retailer, that it was not used on my application. So, since it came w/o it from the factory (as far as I know, no one had ever touched it), I went back w/o it. Did not seem to be leaking befote....I'm probably being a little overly concerned about it. Thanks again.

All times are GMT -7. The time now is 03:39 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
© 2001-2015 performanceIX, Inc. All Rights Reserved .: guidelines .:. privacy .:. terms