Bimmerfest - BMW Forums

Bimmerfest - BMW Forums (http://www.bimmerfest.com/forums/index.php)
-   E36 (1991 - 1999) (http://www.bimmerfest.com/forums/forumdisplay.php?f=97)
-   -   1998 e36 323is aftermarket HU (http://www.bimmerfest.com/forums/showthread.php?t=663285)

meplusbmw 12-10-2012 01:58 PM

1998 e36 323is aftermarket HU
 
Hello, noon question for ya...
I'm installing a Kenwood headunit in my car. I bought the 70-8590 adapter. Which wire from the headunit wires do I connect the blue wire from the adapter to? There's a antenna control wire and a "P. Control" wire left from the headunit wires. I'm guessing the p control goes with the amp p control and the antenna control wire is to the blue wire from the adapter. Did I just answer my own question?

Sent from my LG-P999 using Bimmer App

hornhospital 12-10-2012 02:00 PM

:rofl: Yes, you did. :thumbup:

petriej 12-10-2012 02:09 PM

Best thread ever.

meplusbmw 12-11-2012 03:17 PM

where should I connect the ground wire from the headunit wires? Should I just ground it to the car? Is yes, then where. The back of the compartment is all plastic.

Sent from my LG-P999 using Bimmer App

BMRfanatic 12-11-2012 03:22 PM

the black( or is it brown?) wire that goes from the harness into the car is fine

meplusbmw 12-11-2012 11:44 PM

Everything is connected but the radio won't turn on????


All times are GMT -7. The time now is 03:50 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
© 2001-2011 performanceIX, Inc. All Rights Reserved .: guidelines .:. privacy .:. terms