Bimmerfest - BMW Forums

Bimmerfest - BMW Forums (http://www.bimmerfest.com/forums/index.php)
-   E89 Z4 (2009 - current) (http://www.bimmerfest.com/forums/forumdisplay.php?f=145)
-   -   Z-4 windshield washer pump (http://www.bimmerfest.com/forums/showthread.php?t=663414)

jjswart 12-11-2012 08:36 AM

Z-4 windshield washer pump
 
How do you replace a windshield washer pump?

RufusKing 12-11-2012 05:55 PM

Quote:

Originally Posted by jjswart (Post 7242719)
How do you replace a windshield washer pump?

it should be fairly simple. Just remove the resevoir and pump then detact the wires. The pump should be mounted to the tank. disassemble and replace then reinstall in reverse order.

ChuckE89 12-18-2012 02:15 PM

the pump for the windshield is the one on the rear, towards the firewall. push it towards the rear of the car a bit [like 1/2"] and then pull up and wiggle, and by wiggle, I mean you will dwarf your efforts to get away with forgetting your anniversary, it should move pretty much straight up, and hopefully the strainer will come with it. If you are replacing the pump, then best to replace he strainer also. If the strainer does not come out with the pump, then you will need to grab it with some needle-nose pliers. and get it out, as the strainer usually clogs pretty easy and you may find the pump is good, but the strainer is not.


All times are GMT -7. The time now is 08:49 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
© 2001-2011 performanceIX, Inc. All Rights Reserved .: guidelines .:. privacy .:. terms