Idle Problem MAF?
I have a 1995 325i and I'm getting that up and down revving thing. It'll go from about 200 rpm up to 1500 rpm and will eventually die if I press on the gas too much. And when I press down, it really lags and is not strong at all.
Took a video of it so you can hear the noise and see what it does. Duct tape on the boot. There's a nice tear in it.
I just cleaned the MAF sensor and still nothin. I got the code 1215 which IS the MAF sensor.
So I'm about ready to buy a new sensor and a new boot. But before I drop 200 dollars, are there any other things I could check to see what the problem might be?
Thanks a lot!_a_
|All times are GMT -7. The time now is 10:03 PM.|
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
© 2001-2011 performanceIX, Inc. All Rights Reserved .: guidelines .:. privacy .:. terms