Ok, thanks for all the help and hints as I worked out my engine issue. Now that I think it is good, time to work towards getting the heater vents to work properly.
I assume there are shutter doors that open and close to redistribute the air. I hear the blower motor going well but not much air coming through. When I move the selector to defrost windshierld, I hear it change but it doesn't change enough to blow much air to the windshild. In fact, no matter what I select, not much air comes out of any vent.
Are these electric or cable actuated doors. Any ideas?
Here is one of several DIY write ups on it:
Hope this helps.
|All times are GMT -7. The time now is 12:41 PM.|
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
© 2001-2015 performanceIX, Inc. All Rights Reserved .: guidelines .:. privacy .:. terms