Bimmerfest - BMW Forums

Bimmerfest - BMW Forums (http://www.bimmerfest.com/forums/index.php)
-   E30 (1982 - 1993) (http://www.bimmerfest.com/forums/forumdisplay.php?f=96)
-   -   E30 wheel fitment (http://www.bimmerfest.com/forums/showthread.php?t=670306)

beemakid 01-15-2013 05:33 PM

E30 wheel fitment
 
I have searched but can't get a clear answer. I'm looking at a set of 16" wheels and I'd like et20. Tired of using spacers tho so I'd like to run them without. Fender pulling/rolling isn't a problem just wondering how wide I can run before I have the same problem as my Mini Cooper wheels and rub strut and rear inner fender. Thanks in advance

fcsteve 01-15-2013 05:49 PM

you musn't understand wheel offsets and sizing at all.

read:

https://www.rsracing.com/tech-wheel.html

et20 on a 16x7 is not the same as 16x8 et20. each wheel will have different backspacing and different amounts of wheel sticking out farther from the hub.

you need to be more specific about what you want. are you looking to "stance" the car or put on some fat rubber ?

beemakid 01-15-2013 05:52 PM

Sorry I didn't take that into account. I'm looking for stance and to sit flush. Looking for lots of concave along with it. That's my goal

beemakid 01-15-2013 06:12 PM

well looks like my only option for 16" is by 8"

fcsteve 01-15-2013 07:09 PM

lots of concave ? do you mean camber ?

you can run 16x9's flush

beemakid 01-15-2013 07:10 PM

Nope wheel concave

downhiller 01-16-2013 05:15 PM

Quote:

Originally Posted by beemakid (Post 7316252)
Nope wheel concave

good luck. theres not alot of room in there to have a good concaved wheel

beemakid 01-17-2013 04:52 AM

I know great looking body, not much room for anything else


All times are GMT -7. The time now is 02:56 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
© 2001-2011 performanceIX, Inc. All Rights Reserved .: guidelines .:. privacy .:. terms