Bimmerfest - BMW Forums

Bimmerfest - BMW Forums (http://www.bimmerfest.com/forums/index.php)
-   Parting Out (http://www.bimmerfest.com/forums/forumdisplay.php?f=130)
-   -   1996 BMW 328iC E36 Convertible Coupe Car - Parts Car, Parting Out (http://www.bimmerfest.com/forums/showthread.php?t=671637)

cawllc 01-22-2013 09:59 AM

1996 BMW 328iC E36 Convertible Coupe Car - Parts Car, Parting Out
 
2 Attachment(s)
I Bought This One Without Seeing It In Person With The Intention Of Repair, When It Arrived The Frame Was Damaged Up Front In 4 Places So I've Decide to Part It Out. Good Motor,Good Trans.

iredlinemy///m3 01-25-2013 11:18 PM

Interior color?
Options? (HK?)

Kdoherty 02-06-2013 09:24 AM

how much for the engine, stripped with no accessories, i just need the block and head. I live in MA so i'd need to have it shipped here :-/

petriej 02-07-2013 10:47 AM

Is the top OK?

Stigclone001 02-08-2013 12:08 PM

I will buy it off you... I'm in Jacksonville FL. I need the engine and dmc and exhaust system. How many miles does it have on it? So many parts I need.

Leo Pepsi 02-13-2013 01:12 PM

Hey I'll take the nose panel with grill ...and complete air box filter..all peaces.let me know.

GFawkes 02-18-2013 09:12 AM

Quote:

Originally Posted by cawllc (Post 7329869)
I Bought This One Without Seeing It In Person With The Intention Of Repair, When It Arrived The Frame Was Damaged Up Front In 4 Places So I've Decide to Part It Out. Good Motor,Good Trans.

Hi hon,
Up in buffalo, ny and looking for the interior door panels for this car. Hoping to get a decent qoute since shipping will be involved and everyone up here is asking "brand new" replacement part prices.
please get back to me.

thank you,
jenna

BreezINzzz 03-11-2013 06:24 PM

6 Attachment(s)
Hello,
I need the following:
1- Towing hinge 72157203519
2- Glass break sensor and Alarm indicator LED See pic. I'll take any configuration you have available.
3- Antenna Base F short rod 65218375159 See pic.
4- Central Locking System Switch 61318368931 complete with the wiring body harness pigtail, leave about 4" of wire for splicing if possible. See pic.

Bcook 03-12-2013 04:16 PM

I'd like your mid pipes if theyre still available. I'm in VA so I could come pick them up. Where in NC are you located?

Paul4phun 03-12-2013 07:54 PM

I would be interested in the conv top front assembly.

droppinbms 03-14-2013 08:29 PM

hows the interior look

mikajmd 03-24-2013 04:34 PM

I am Interested in the
-Rear Quarter Molding for the passenger side w/clips (look at pictures for reference).
-Rear seat belt cover
-Possibly Third (Horizontal) brake light
-Blower motor resistor
-Coolant sensor
http://imgur.com/FMlx3Yz

http://imgur.com/bA9PzpM

http://imgur.com/bA9PzpM

http://imgur.com/FMlx3Yz

Spmarshall325i 03-25-2013 10:20 PM

I'm interested in the engine I'm in mt but ill cover shipping if your willing

E36M3Pilot 06-26-2013 10:19 AM

I am interested in the two tension rods
 
Under the rear deck.

one is called a Tension bow rod and the other is called a Main Top Rod. If it is easier to pull, I could also take the two pivot plates but don't really need them.

SPapaJr 06-30-2013 09:58 AM

Is this a manual or auto?

I'm interested in tackling the auto to manual swap for my 98 323is :)

Ramtek55 11-14-2013 11:24 PM

Is this still available?
If so email Danielramirez 546 at gmail dot com

Lzeigler 03-26-2014 06:52 PM

Still parting out? I could use a rear seat belt (black) shipped to 44691. Email me at lzeigler05@aol.com

dwonda 04-04-2014 02:20 PM

Are you still parting out?


All times are GMT -7. The time now is 04:13 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
© 2001-2011 performanceIX, Inc. All Rights Reserved .: guidelines .:. privacy .:. terms