Welcome to Bimmerfest -- The #1 Online Community for BMW related information! Please enjoy the discussion forums below and share your experiences with the 200,000 current, new and past BMW owners. The forums are broken out by car model and into other special interest sections such as BMW European Delivery and a special forum to voice your questions to the many BMW dealers on the site to assist our members!

Please follow the links below to help get you started!

Go Back   Bimmerfest - BMW Forums > Search Forums

Showing results 1 to 25 of 176
Search took 2.51 seconds.
Search: Keyword(s): ; Posts Made By: Wertles
Forum: E36 /7 Z3 (1996-2002) 07-18-2014, 12:21 PM
Replies: 13
Views: 428
Posted By Wertles
A couple of thoughts. First, 166K miles is not...

A couple of thoughts. First, 166K miles is not the end of life for a well maintained 2.8. The cooling system is the weak point so see what has been replaced. If unsure of what is original, plan on...
Forum: E36 /7 Z3 (1996-2002) 06-28-2014, 07:27 PM
Replies: 21
Views: 622
Posted By Wertles
It is not an M. Up until 2000, the M cars all had...

It is not an M. Up until 2000, the M cars all had the S-52, 3.2 liter motor. 2001-2002 M cars have the S54, 3.2 liter motor. M cars have dual exhaust, different suspension, brakes, gauges, mirrors,...
Forum: E36 /7 Z3 (1996-2002) 06-12-2014, 12:45 PM
Replies: 18
Views: 739
Posted By Wertles
An engine designed to run on 91/93 octane will be...

An engine designed to run on 91/93 octane will be most powerful and efficient running that grade of gas. In a pinch, running lower octane fuels will be fine because BMW has knock sensors. You will...
Forum: E36 /7 Z3 (1996-2002) 06-12-2014, 07:18 AM
Replies: 18
Views: 739
Posted By Wertles
Directly from the owners manual. ...

Directly from the owners manual.

http://i1185.photobucket.com/albums/z342/wertles72/imagejpg1_zpsab9d323c.jpg
Forum: E36 /7 Z3 (1996-2002) 06-05-2014, 02:30 PM
Replies: 5
Views: 285
Posted By Wertles
Check the fuse first. Had the exact same issue. ...

Check the fuse first. Had the exact same issue. Pulled the fuse, replaced it. All better.
Forum: E36 /7 Z3 (1996-2002) 05-21-2014, 06:02 AM
Replies: 35
Views: 1,057
Posted By Wertles
http://www.bimmerdiffs.com/collections/z3-products...

http://www.bimmerdiffs.com/collections/z3-products

OR

http://www.whalenshiftmachine.com/index.php?main_page=product_info&cPath=3&products_id=8&zenid=5599d830329fd5c0382f56f684660dc4



...
Forum: E36 /7 Z3 (1996-2002) 05-16-2014, 05:08 AM
Replies: 35
Views: 1,057
Posted By Wertles
I'm not sure what year it changed, but the...

I'm not sure what year it changed, but the earlier seats have different connectors than the later ones. There are adapters you can buy to retrofit later seats into earlier cars without having to...
Forum: E36 /7 Z3 (1996-2002) 05-05-2014, 11:53 AM
Replies: 14
Views: 568
Posted By Wertles
Try this. ...

Try this.

http://e36-drift.blogspot.com/2009/04/14-diy-service-indicator-reset.html?m=1
Forum: E36 /7 Z3 (1996-2002) 04-30-2014, 06:40 AM
Replies: 12
Views: 382
Posted By Wertles
Do you allow coupes?:rofl:

Do you allow coupes?:rofl:
Forum: E36 /7 Z3 (1996-2002) 04-29-2014, 11:22 AM
Replies: 12
Views: 382
Posted By Wertles
I am guessing, if it's like any other tourist...

I am guessing, if it's like any other tourist group run (I am a corner flagger at The Glen) that it will be a supervised run around the track, meaning there will be a lead pace car and no passing...
Forum: E36 /7 Z3 (1996-2002) 04-28-2014, 09:46 AM
Replies: 9
Views: 614
Posted By Wertles
I'll shoot him a text to see if he knows someone.

I'll shoot him a text to see if he knows someone.
Forum: E36 /7 Z3 (1996-2002) 04-28-2014, 05:52 AM
Replies: 9
Views: 614
Posted By Wertles
You need to find a good wheel repair place. The...

You need to find a good wheel repair place. The bent wheels can most of the time be straightened. The cost is usually $80-100. I have had 1 on my coupe and 3 on my parents car straightened with...
Forum: E36 /7 Z3 (1996-2002) 04-23-2014, 08:18 AM
Replies: 3
Views: 268
Posted By Wertles
With the transmission and diff, the best practice...

With the transmission and diff, the best practice is to change the fluids after they are warm. Both the transmission and diff have a drain plug and a fill plug. There are many write ups on the...
Forum: E36 /7 Z3 (1996-2002) 04-05-2014, 10:40 PM
Replies: 8
Views: 467
Posted By Wertles
You are correct that there are no replacement u...

You are correct that there are no replacement u joints except for a remanufactured shaft. I tried to have mine replaced when I had my driveshaft shortened for my 6 speed conversion only to find that...
Forum: E36 /7 Z3 (1996-2002) 04-05-2014, 07:36 AM
Replies: 8
Views: 467
Posted By Wertles
If you are a DIY person, I would go the used...

If you are a DIY person, I would go the used route as the labor is free. It is a fairly easy process. Maybe 2 hours at most if you have never done it before. The joints should theoretically be good...
Forum: E36 /7 Z3 (1996-2002) 04-02-2014, 11:01 AM
Replies: 2
Views: 267
Posted By Wertles
Yes, the military is already using them. ...

Yes, the military is already using them.


http://www.polaris.com/en-us/military-vehicles/military-atv/sportsman-mv-850-le/features
Forum: E36 /7 Z3 (1996-2002) 04-02-2014, 10:45 AM
Replies: 1
Views: 203
Posted By Wertles
Not sure about the availability of the Quaiffe,...

Not sure about the availability of the Quaiffe, but your rear diff is not that difficult to rebuild. Chances are by now, it is running as an open diff as the clutches are worn out. Here is where to...
Forum: E36 /7 Z3 (1996-2002) 04-02-2014, 10:39 AM
Replies: 13
Views: 644
Posted By Wertles
You sir have a different transmission than the OP.

You sir have a different transmission than the OP.
Forum: E36 /7 Z3 (1996-2002) 04-01-2014, 06:22 PM
Replies: 13
Views: 644
Posted By Wertles
The manual transmission does not have a dip...

The manual transmission does not have a dip stick. I could be mistaken,but I believe you are looking at the power steering reservoir. That system uses automatic transmission fluid. Your manual...
Forum: E36 /7 Z3 (1996-2002) 03-28-2014, 09:19 AM
Replies: 27
Views: 2,309
Posted By Wertles
It is not hard at all to replace the guides....

It is not hard at all to replace the guides. First seat took an hour. Second 45 minutes. By the time you do the "repair," you could have done the job the right way and not have to worry about it. ...
Forum: E36 /7 Z3 (1996-2002) 03-02-2014, 12:21 PM
Replies: 4
Views: 387
Posted By Wertles
This fixes your problem. I've done it to 3 cars...

This fixes your problem. I've done it to 3 cars so far. At this point, nothing else is needed.

http://www.bimmerfest.com/forums/showthread.php?t=318432&highlight=blend+door+cable+adjust
Forum: E36 /7 Z3 (1996-2002) 02-03-2014, 11:02 AM
Replies: 6
Views: 733
Posted By Wertles
I have had really good luck with PDR but with...

I have had really good luck with PDR but with something that is a skill, every experience is different. Asking used car lots which guy is the best is a great way to find someone with experience and...
Forum: E36 /7 Z3 (1996-2002) 01-22-2014, 11:10 AM
Replies: 7
Views: 571
Posted By Wertles
The poly subframe bushings don't make any noise. ...

The poly subframe bushings don't make any noise. They just limit movement in hopes of preventing the subframe failure. I have the Ireland Engineering in both my cars, both used as daily drivers. On...
Forum: E36 /7 Z3 (1996-2002) 01-11-2014, 04:47 AM
Replies: 4
Views: 431
Posted By Wertles
What's your budget for your build? No one can...

What's your budget for your build? No one can help you without knowing what you have to work with. Putting a turbo on your car is a very expensive upgrade since there are no real bolt on kits. Most...
Forum: E36 /7 Z3 (1996-2002) 01-04-2014, 03:28 PM
Replies: 5
Views: 498
Posted By Wertles
I would check the guibo ASAP to make sure it...

I would check the guibo ASAP to make sure it hasn't come apart. If it is original, it's probably in pieces.
Showing results 1 to 25 of 176

Forum Jump

All times are GMT -7. The time now is 02:41 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
© 2001-2011 performanceIX, Inc. All Rights Reserved .: guidelines .:. privacy .:. terms