Welcome to Bimmerfest -- The #1 Online Community for BMW related information! Please enjoy the discussion forums below and share your experiences with the 200,000 current, new and past BMW owners. The forums are broken out by car model and into other special interest sections such as BMW European Delivery and a special forum to voice your questions to the many BMW dealers on the site to assist our members!

Please follow the links below to help get you started!

Go Back   Bimmerfest - BMW Forums > Search Forums

Showing results 1 to 25 of 868
Search took 0.57 seconds.
Search: Keyword(s): ; Posts Made By: energizedmortal
Forum: E39 (1997 - 2003) 07-20-2016, 08:26 AM
Replies: 13
Views: 572
Posted By energizedmortal
Those are the banjo hose part # 11361705532...

Those are the banjo hose part # 11361705532 washers.

Cn90 write up:

http://www.bimmerfest.com/forums/showthread.php?t=414315
Forum: E39 (1997 - 2003) 06-17-2016, 12:19 PM
Replies: 15
Views: 587
Posted By energizedmortal
Interesting, op if you also see an abs issue swap...

Interesting, op if you also see an abs issue swap your driver side abs sensor to the passenger side and try to clear the codes.

You do not need to lift the car or remove the wheel, just turn the...
Forum: E39 (1997 - 2003) 06-17-2016, 05:45 AM
Replies: 15
Views: 587
Posted By energizedmortal
Unfortunately there is no onboard diagnostic that...

Unfortunately there is no onboard diagnostic that will show you the transmission temperature. Note just because there are no leaks does not mean that there may be a clog but you seem to have this...
Forum: E39 (1997 - 2003) 06-16-2016, 10:42 AM
Replies: 29
Views: 963
Posted By energizedmortal
nice find that refreshed steering wheel is...

nice find that refreshed steering wheel is beautiful! Love the stitching and perforated leather.
Forum: E39 (1997 - 2003) 06-16-2016, 09:10 AM
Replies: 15
Views: 587
Posted By energizedmortal
Please read this : ...

Please read this :

http://www.bimmerfest.com/forums/showthread.php?t=211092

Some changed the sensor, fluid, filter etc and still had the issue. Turned out that getting the transmission to cool...
Forum: E39 (1997 - 2003) 06-16-2016, 08:55 AM
Replies: 4
Views: 280
Posted By energizedmortal
I would start with the fuses under the passenger...

I would start with the fuses under the passenger seat. You can find them cheap at home depot, advanced auto, check autohausaz.

It takes five minutes to get to those fuses, unbolt the front two...
Forum: E39 (1997 - 2003) 06-14-2016, 12:34 PM
Replies: 17
Views: 539
Posted By energizedmortal
Throttle body adaptation is a shot in the dark...

Throttle body adaptation is a shot in the dark but you never know. Put the key in position right before cranking the car on (dash lights on). Press the pedal down all the way for 30 seconds. Let go,...
Forum: E39 (1997 - 2003) 06-14-2016, 09:34 AM
Replies: 33
Views: 709
Posted By energizedmortal
Do you have a picture of the green wire that was...

Do you have a picture of the green wire that was cut, and its current state?

Do you have any scanners- pasoft or INPA?

Check out how this car was being started may offer some clues:
...
Forum: E39 (1997 - 2003) 06-11-2016, 04:43 PM
Replies: 16
Views: 780
Posted By energizedmortal
I used post 9 in this thread to calibrate the...

I used post 9 in this thread to calibrate the steering sensor using INPA.

http://forum.e46fanatics.com/showthread.php?t=1078183

That cable from amazon will work you will just need to open it...
Forum: E39 (1997 - 2003) 06-09-2016, 05:52 AM
Replies: 10
Views: 372
Posted By energizedmortal
Start with the ccv hose that runs to the oil pan-...

Start with the ccv hose that runs to the oil pan- is the alternator wire chewing through it? Looks for tears or cracks in both upper and lower intake manifold boots that connect to the throttle body....
Forum: E39 (1997 - 2003) 06-08-2016, 10:33 AM
Replies: 69
Views: 1,990
Posted By energizedmortal
I may be wrong but I think that as long as it has...

I may be wrong but I think that as long as it has compatible ATF at the correct level and the transmission cooling is working properly the transmission will function properly. Most failures I have...
Forum: E39 (1997 - 2003) 06-07-2016, 12:41 PM
Replies: 11
Views: 499
Posted By energizedmortal
Rear left speed sensor is not getting any signal?...

Rear left speed sensor is not getting any signal? Have you tried to swap the rear right to that wheel and check for signal?

My front driver side did not have signal, I put it on the front right...
Forum: E39 (1997 - 2003) 06-07-2016, 12:21 PM
Replies: 13
Views: 1,539
Posted By energizedmortal
I used "the right stuff" gasket maker on the...

I used "the right stuff" gasket maker on the transmission pan without the paper gasket - bone dry!
Forum: E39 (1997 - 2003) 06-07-2016, 11:05 AM
Replies: 10
Views: 385
Posted By energizedmortal
New led bulb wire I installed was the culprit for...

New led bulb wire I installed was the culprit for me. I swapped the leds from left to right and it was one of the wires (bulbs were fine). Seller shipped a free wire.
Forum: E39 (1997 - 2003) 06-05-2016, 10:18 AM
Replies: 2
Views: 200
Posted By energizedmortal
"All Fxx chassis like your 2011 F10 require an...

"All Fxx chassis like your 2011 F10 require an ENET interface cable for use with all Apps using EDIABAS (e.g. Tool32, INPA, E-Sys, etc.). This is an Ethernet by OBDII connection.

Exx chassis like...
Forum: E39 (1997 - 2003) 06-01-2016, 07:13 AM
Replies: 11
Views: 447
Posted By energizedmortal
New Rear sensors OEM? What if you swap rear right...

New Rear sensors OEM? What if you swap rear right and left sensor, does the 2mph move to the left rear sensor? What speed did the old rear sensors read?

Double check that the rear wiring is intact...
Forum: E39 (1997 - 2003) 05-31-2016, 10:41 AM
Replies: 47
Views: 1,649
Posted By energizedmortal
Issues: transmission gasket is leaking-...

Issues:

transmission gasket is leaking- dropping the pan tomorrow and going with castrol imported multi vehicle, new filter and only permaxtex the right stuff- no gasket this time.
driveshaft...
Forum: E39 (1997 - 2003) 05-31-2016, 05:45 AM
Replies: 9
Views: 949
Posted By energizedmortal
Thanks for the tip I already replaced the giubo...

Thanks for the tip I already replaced the giubo but need to replace the csb and grease the rear cv joint asap.
Forum: E39 (1997 - 2003) 05-27-2016, 05:13 AM
Replies: 15
Views: 612
Posted By energizedmortal
If you do not want the mirror to go down when...

If you do not want the mirror to go down when reversing, then switch your mirror adjuster to the right position.

INPA allows me to check more- like transmission temperature, knock sensors, fuel...
Forum: E39 (1997 - 2003) 05-26-2016, 10:12 AM
Replies: 30
Views: 2,361
Posted By energizedmortal
:cry: To add some information that may help...

:cry:

To add some information that may help others. I have a 2003 530i automatic with 188,000 miles since 97,000 miles when I become the second owner. The torque converter was replaced in 10/2013...
Forum: E39 (1997 - 2003) 05-26-2016, 05:24 AM
Replies: 3
Views: 295
Posted By energizedmortal
this may help: ...

this may help:

http://www.bimmerfest.com/forums/showthread.php?t=914069
Forum: E39 (1997 - 2003) 05-26-2016, 05:13 AM
Replies: 15
Views: 612
Posted By energizedmortal
I also needed to solder pin 7 and 8 together. I...

I also needed to solder pin 7 and 8 together. I have pasoft on a Thinkpad T450s win 10. For INPA and NCSexpert I use hyper V xp virtual machine. To get the usb port to talk to the hyper v I enabled...
Forum: E39 (1997 - 2003) 05-25-2016, 01:29 PM
Replies: 10
Views: 406
Posted By energizedmortal
Check this thread: ...

Check this thread:

http://www.bimmerfest.com/forums/showthread.php?t=914069
Forum: E39 (1997 - 2003) 05-24-2016, 12:56 PM
Replies: 48
Views: 1,636
Posted By energizedmortal
Bmw of Manhattan has them for $27 each plus tax...

Bmw of Manhattan has them for $27 each plus tax :eek:
Forum: E39 (1997 - 2003) 05-24-2016, 05:53 AM
Replies: 48
Views: 1,636
Posted By energizedmortal
Someone in the e46 forum sent the 11621427586...

Someone in the e46 forum sent the 11621427586 bolts from two different dealers to a lab to verify the metallurgy.

"the results closely approximate 422 stainless steel. it does not have nearly the...
Showing results 1 to 25 of 868

Forum Jump

All times are GMT -7. The time now is 11:57 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
© 2001-2015 performanceIX, Inc. All Rights Reserved .: guidelines .:. privacy .:. terms