View Single Post
  #12  
Old 03-16-2009, 10:08 PM
Bucknekkid's Avatar
Bucknekkid Bucknekkid is offline
Fully Dysfunctional
Location: North Carolina
 
Join Date: Feb 2009
Posts: 2,372
Mein Auto: 02 325i
Quote:
Originally Posted by Solidjake View Post
Dont you have to snap off part of the white thing that pressed against the frame of the car?
Quote:
Originally Posted by jhowe1 View Post
i had to do that...

i get a "bulb out" light for a couple seconds when i turn lights on, on the RH side only sometimes though... no biggie smalls.
Quote:
Originally Posted by Yurekk View Post
Yeah, i had to do that. If you don’t snap this thing off it will press against the LED plate and most likely will damage it.

Where was that in the "instructions" ?...I wish I had known before I installed mine, I heard a crack and yep I broke the board on one of them..It still works though !...

My clear sides didn't mention anything on the instructions either about having to file or modify the slot so they would seat properly...You don't find that out until you call JleviSW and asking them why they don't seat properly...They tell you then about this "easy" little fix to get it to seat, but what they don't tell you is "they don't take them back if you mess it up"... Why won't a part so simple work without modifying it ?
__________________
Today is more like it is now, than it has ever been before...

That costs too mucking fuch ! !...


Sig courtesy of SolidJake...
Reply With Quote