View Single Post
Old 04-23-2009, 01:02 PM
mmm635's Avatar
mmm635 mmm635 is offline
Officially Welcomed to the 'Fest
Location: Jackson, MS
Join Date: Mar 2005
Posts: 1,179
Mein Auto: '02 525i Sp/5, 95 FJ80 LC
Originally Posted by cn90 View Post
Now I am even more confused.

Thrust Arm Bushing for 6-cylinder.
PN is 31129068753
Apparently it is not fluid-filled (Basically a solid piece of rubber or polyurethane or whatever, but not fluid).
Part #5:

Thrust Arm Bushing for 8-cylinder.
PN is 31121092609
Apparently it is fluid-filled.
Part #6:
The bushing (oem) for the thrust arm is fluid filled for the I6. The lower control arm bushing (oem) is not fluid filled for the I6.

Here are the pics: I6 Control Arm Install (Thrust)

Halfway down you will see the oem bushings (new) that were removed from the metal sleeve. The fluid leaked all over my work table and you cannot see it in the pics. However, you will see the guts. My suggestion is to suck it up if you can and get the Lemfoerders.

Last edited by mmm635; 04-23-2009 at 01:05 PM.
Reply With Quote