View Single Post
  #64  
Old 06-05-2009, 03:39 PM
bluebee's Avatar
bluebee bluebee is offline
Seek to understand,^Value
Location: San Jose, California
 
Join Date: Mar 2008
Posts: 21,047
Mein Auto: 02 BMW 525i M54 auto 130K
Quote:
Originally Posted by Max_VQ View Post
I think you may have 5.7... More good reading in the attached PDFs.
Your documents are FANTASTIC to help me understand the system!

All cross referencing indicates I do have the Bosch 5.7, including those references in the documents you posted which explain how the whole Bosch 5.7 ABS/DSC system works with the sensors.

Others will benefit also! One way, if we can figure it out how to do it, to test this front-brake pressure sensor would be to do a "flying lead" while the car is running to see if a 0 to 5 volt signal is generated while using the brakes.

But, it would be easier to do a static test of this front-brake pressure sensor with the car ignition off from the ABS module connector.

Do you have any ideas how to test the "offset" of the front-brake "pressure sensor" that is screwed into the rear of the ABS hydraulic module.

Attached Thumbnails
Click image for larger version

Name:	hydraulic_unit_brake_pressure_sensor.jpg
Views:	225
Size:	127.9 KB
ID:	188294   Click image for larger version

Name:	hydraulic_unit_brake_pressure_sensor_57.gif
Views:	38254
Size:	46.1 KB
ID:	188301  

Last edited by bluebee; 06-05-2009 at 05:27 PM.
Reply With Quote