10-17-2009, 07:17 PM
Join Date: Feb 2008
Mein Auto: 525i 2003
twisted seat surprise, see images
as indicated in my other post, I took out my driver seat to fix the twist seat
I must admit that I spent a long time "fixing" the cable ends of the motor that control seat height (wrong motor, the little one) at least I did not cause any damage
Later I started working on the other motor, there has to be that one!! (large one)
ok, I disengaged the cable from the motor and pulled the inner cable outwards and found what is shown in the picture, the cable pulls all the way out!!!!. I did not try all the way but I am sure it would come out of the sheath.
The short cable (shown in the picture for comparison) belongs to the height controller, for which I cannot pull the inner cable outwards
By jieg at 2009-10-17
is the problem on the other end of the cable?
By jieg, shot with KF750 at 2009-10-17
any one has experience working on the other extreme of the cable?
All DIY´s I read are related to the motor end of the cable
any help is needed and welcomed