View Single Post
  #7  
Old 11-07-2009, 05:08 PM
Evlengr's Avatar
Evlengr Evlengr is offline
Ukemi - that's how I roll
Location: MD
 
Join Date: Feb 2007
Posts: 4,252
Mein Auto: 2013 Audi S4 2010 MT MCS
Quote:
Originally Posted by shamernj View Post
Thanks. I took the two pictures, scaled them and then superimposed them. It looks like the holes match up but not sure about the depth. The attached picture shows the total depth to be 2.5 inches with 0.7 inches of that sticking out into the car.

Also concerned about the specs - primarily the 86 dB sensitivity. Anybody tried using speakers of this sensitivity with the stock amps?

They're two way with an internal crossover so I don't think there would be any issues from that perspective in getting them to work.

Thanks,

Stuart
The spl sensitivity is pretty low. I'm not sure they will give you the improvements you are looking for. I would suspect in the low 90's is much better.

Co-ax speakers are fine.

Let me do some quick research and get back to you.
__________________
2013 S4 Loaded (and NO RFT's) Awesome is an understatement
2008 MT X3 RIP you were a faithful sidekick and will be missed.
2007 AT X3 RIPOS
2005 GC
2000 Jeep Cherokee
1997 Twin Turbo RX-7
1984 GTI Wolfsburg Edition Neuspeed and more
Reply With Quote