View Single Post
  #15  
Old 12-09-2009, 01:54 PM
Starless Starless is offline
*^^^^^^^^*
Location: STL, MO
 
Join Date: Sep 2009
Posts: 1,623
Mein Auto: 2002 325i Auto
Quote:
Originally Posted by 968RACER View Post
You make it look so easy.
Quote:
Originally Posted by spazmataz View Post
Man, thats a really good DIY!! This DIY makes it look easy but you can still see its a tough job!
Well, taking stuff apart is easy. It's the OS itself that's difficult to remove and even more difficult to install mainly due to it's extremely inconvenient to reach location deep under the intake manifold in a very tight space. On the photos you can not really see the depth but the the wrench with the torx bit at the end on one of the pictures gives you an idea. And you have to be positive that all the OS hoses are attached securely to it otherwise you'll have a leak and you'll need to start all over again which, trust me, you do not want to do. Not very difficult technically but requires lots of patience and attention. That's it.
Reply With Quote