Fuel Injector RnR
Since my Fuel Injectors were out I took the opportunity to replace the o-rings. Bad o-rings cause leaking gas and fire. My originals weren't too bad but someone may find this of use at some point.
Remove each injector one at a time and replacing before moving to the next one.
unclip leveling clamp
unclip electrical connections
Pull Straight UP
inspect each injector for damage or clogging
Replace upper and lower o-rings
Make sure housing is clean q-tip
Lock clip in with Clamp
Clean Electrical connections with Electric Cleaner and reconnect with electric lubricant sealer