View Single Post
Old 02-11-2010, 08:33 PM
stang_me1990 stang_me1990 is offline
Officially Welcomed to the 'Fest
Location: SW Wisconsin
Join Date: Jul 2009
Posts: 256
Mein Auto: 93 325i
Originally Posted by FenderBender View Post
The drain will be at the top of the oil pan. I know all about this.

And what filter? There is no filter under the frame?

The inlet is a little low, but wait for finished pics, you'll see. It will raise with the suspension, making it not as bad. But you're right, it's not ideal, but I want to keep A/C.
Just looked like the turbo was to low to get an angle for it to drain. prolly just the pics.

Was talkin about having your air filter down there....on the intake side of the turbo

Keep the A/C for sure, no sense of building something that isnt comfortable to drive. I did a turbo on my last mustang and it would have been a lot easier to make the plumbing without it but got to have A/C. Make sure you use some good t-bolts clamps on the inlet since its down there...pretty much the entire cold side could use em.

But good lookin build...turbos are great
Reply With Quote