View Single Post
  #75  
Old 04-02-2010, 08:58 PM
Ron Stygar's Avatar
Ron Stygar Ron Stygar is offline
19,585 Miles
Location: CT
 
Join Date: Mar 2002
Posts: 11,143
Mein Auto: Z4 M Coupe 6LL93033
CTEK 7002 Battery Charger

http://www.ctek.com/EN-US/eLearningUS/Default.aspx

http://www.ctek.com/Manuals/new_US7002_EN.pdf

When charged in normal it draws .03 ampere.
Battery Tender draws .06 ampere.







I added a aluminum plate on the bottom of the CTEK with 1/2" height spacers.
Was going to match the bottom of the CTEK, but too much time doing it by hand.

1 each Plate 4" x 8" x 1/8" aluminum. (polished with 220 wet paper)
2 each Spacer 3/8" hex, 1/2" height w/ 8-32 male / female.
2 each Nut nylon lock stainless.
2 each Screw 8-32 1/2" counter sink stainless.



Back on the garage floor doing its thing.

__________________
.
.

Last edited by Ron Stygar; 03-20-2011 at 04:02 PM.
Reply With Quote