View Single Post
Old 07-29-2010, 01:49 PM
stigst3r's Avatar
stigst3r stigst3r is offline
Officially Welcomed to the 'Fest
Location: NYC
Join Date: Jun 2009
Posts: 745
Mein Auto: e39
I made this tool from scratch using a 1/4" thick steel bar... At the end i barely used it.

i sprayed the fan clutch nut with WD-40 24 hours in advance... then i came back a day later & sprayed it every 15-30 min for like a hour or two. then i got my handy dandy avg size hammer combined with 32mm wrench and tried this method:

worked like a charm


RIP: 1998 540i sport 6spd | daily: 1999 528 m-sport 5spd

Last edited by stigst3r; 07-29-2010 at 01:53 PM.
Reply With Quote