07-29-2010, 03:52 PM
|
 |
Officially Welcomed to the 'Fest
Location: Jackson, MS
|
|
Join Date: Mar 2005
Posts: 1,179
Mein Auto: '02 525i Sp/5, 95 FJ80 LC
|
|
Quote:
Originally Posted by bluebee
Hi Michel,
To help out, on purpose, I bought the tool that had both the 45mm (I6) and 38mm (V8) bolt hole spacing (and I used it this week for the first time, and it worked fine on the M54).
I have plenty of (SAE) calipers and micrometers ... so if you, or anyone needs anything precisely measured either for a CAD diagram or to make their own tool, just ask and I'll make the measurements for you.
OMG. $995 USD. Whoooooooeeeeeee! You must be a pro!
 |
I have been using Autocad and other modeling programs for years. Rhino is the best of the lot and probably why NASA and Saleen use it, as well as many architects/engineers that need more intuitive 3D Modeling.
Yes, it is expensive, but the capabilities are amazing. You should go back to their website and download the Demo - you will be impressed!
If you can get me the measurements in a similar fashion to mine, then I can make another model and update the drawing.
Last edited by mmm635; 07-29-2010 at 03:54 PM.
|