Bimmerfest - BMW Forums - View Single Post - Cowl & lower windshield strip replaced (E39)
View Single Post
  #26  
Old 09-25-2010, 03:19 PM
Ågent99's Avatar
Ågent99 Ågent99 is offline
Moderator, 5-Series
Location: Bay Area, CA
 
Join Date: Jan 2002
Posts: 5,937
Mein Auto: ...a lot of people crazy.
Quote:
Originally Posted by LTDUTCH View Post
That natsy windshield wiper arm nut on the drivers side is very easy to remove. NAPA is probably the ONLY tool store that carries the right size puller. Photo shows a 4 pc gear puller set, but only the smallest puller is needed. I used a 3" gear puller due to working space restrictions with hood installed. A rubber mallet was not used... only the gear puller to remove the nut and then cleaned off the spline nut post prior to reinstalling the nut.
Autozone carries a puller that fits fine: OEM 2 & 3 Jaw 2 Ton Puller (25901).

I picked one up for $35. OEM is the brand name. I used it in the 2 arm config and it worked just great.
__________________
2001 530i/5 (E39), Topaz Blue/Stone Green/Black (sold) *very rare interior/exterior color combo*
2005 545i/SMG (E60), ED Order, Titanium Grey/Grey (lease over)
2014 335i/Auto (F30), Mineral Grey/Black (lease over)
2017 340i/Auto (F30), ED Order, Estoril Blue/Black
Reply With Quote