View Single Post
  #137  
Old 04-03-2011, 09:21 PM
granlund granlund is offline
Officially Welcomed to the 'Fest
Location: Dayton, OH
 
Join Date: Jan 2011
Posts: 542
Mein Auto: -02 530 & -92 325is
The fan is attached to the waterpump with a 32mm nut that is reverse-threaded. Put the 32mm wrench straight down on the nut between the fan blades and the serpentine belt pulley, and give it a good whack towards the driver's side. If it does not loosen, spray the back end of the nut with some PB blaster and wait 1h until you try again.
Reply With Quote