View Single Post
  #4  
Old 04-18-2011, 08:49 PM
tampamark tampamark is online now
Officially Welcomed to the 'Fest
Location: tampa fl
 
Join Date: Jan 2009
Posts: 2,885
Mein Auto: 2006 650 convertible!!!
Quote:
Originally Posted by ragal View Post
Hello

I removed all screws etc,,, but theres 1 fiber cable that hold the cover?

how i remove him??
Seems like you may be stumped pulling off the cover. If I read this right, it is a metal cable and is nothing more than a ball end, release it by pulling the metal wire sideways out of the channel. The little ball comes out last. When you put it back in make sure and snap the little ball back into the clip all the way. Just take a look at the picture to see what it looks like with the clip removed.

Make sure you reattach all the way, this has something to do with the convertible top if memory serves me correctly.

EDIT: On a side note, the TIS program also has a special warning you should be aware of. When removing and installing the Wheel Arch Cover take extra care and confirm that the convertible drain hose is still attached. It is easy to knock it off and then you will have water ruin your electronics in the trunk.
Attached Thumbnails
Click image for larger version

Name:	bmw cover 004 (Large).jpg
Views:	141
Size:	102.7 KB
ID:	275185   Click image for larger version

Name:	bmw cover 006 (Large).jpg
Views:	138
Size:	162.3 KB
ID:	275186  

Last edited by tampamark; 04-18-2011 at 09:00 PM.
Reply With Quote