View Single Post
  #10  
Old 05-06-2011, 06:47 PM
Monolith Monolith is offline
Officially Welcomed to the 'Fest
Location: NJ
 
Join Date: May 2008
Posts: 751
Mein Auto: 1997 Z3 1.9L DASC Auto
I don't see anything out of place and the light assembly seems to be on correctly. The base of the shift lever (where it splits) at the bottom could lift the panel up if the shift lever is loose at the base.

Check if the base assembly is loose. Check the rear bolt on the base assembly and see if someone accidentally installed a washer, etc. under it lifting the rear of the assembly too high.

Last edited by Monolith; 05-06-2011 at 06:49 PM.
Reply With Quote