View Single Post
Old 06-23-2011, 01:53 PM
darkrider darkrider is offline
Registered User
Location: prague
Join Date: May 2011
Posts: 54
Mein Auto: x3 2005
Finally! done ! working

Last night I received the my serial key for Navcoder and went attempting to make the damn thing work! but... no... after the encoding and reboot. no screen - still black.

Today, on my way back from the office, I opened the screen to see one more time if there would be any hope left... and after about 20mn I started to see a king of shape, something on the dark screen

and this is from this afternoon,
after having the car running for 20-30mn... I let you imagein how "dark" the screen was last night after beeing activated few minutes only

Obviously le second screen works far more better

OS upgrade required after encoding the mk4 (each time actually)

German ... oups...
NavCoder to change this

et voila

BTW here where I could connect the NAvcoder and the USB dongle
with the professional retrofit, the original cables remain in place. You just but need to connect the cable to the Blue Plug remaining

on the blue plug

Do not forget to burn 2 OS discs (V29 and v32 for me)


Last edited by darkrider; 06-23-2011 at 02:19 PM.
Reply With Quote