Bimmerfest - BMW Forums - View Single Post - New Boston Acoustic SC50 speakers and BMWTips
View Single Post
Old 10-31-2011, 02:49 PM
JimLev JimLev is offline
Officially Welcomed to the 'Fest
Location: Sundance Mesa, NM
Join Date: Dec 2003
Posts: 4,319
Mein Auto: 540/6, '16 Highlander XLE
Non DSP Amp and Speaker wiring info

Seemyad, the lower the impedance the more power the speaker will draw.
My old front tweeters were 8 ohms, the rears were 4 ohms.
All of the new BA's are 4 ohms.
I use to have my treble set to +1, now it's at -1.

I know all of the pinouts from the two connectors at the amp to the indicated speakers are correct. I pumped audio from a transistor radio to each set of speaker pins at the amp connectors and then verified that the audio was coming from where I have noted it in the chart.

If anyone is going to upgrade their system can you check the front mid speaker wires colors at the speaker and let me know? I didn't start to take many notes until I had the front door panels back on.

If any of you want the real spreadsheet, PM me with your email address and I'll send it to you.

Reply With Quote