View Single Post
  #20  
Old 11-08-2011, 05:15 PM
MightyShilling MightyShilling is offline
Glutton for Punishment
Location: Littleton, CO
 
Join Date: Oct 2011
Posts: 55
Mein Auto: 2000 540it, 1988 951S
Quote:
Originally Posted by Steve530 View Post
Good.

If the SJP was apart when it was installed, it might cause a vacuum leak which I would think would have set a lean mixture code. It certainly would have caused a problem with the vacuum assisted brakes. I'm sure you would have noticed that. My guess is that the vacuum would tend to hold it together.

I don't think it would have caused any real damage, if that's what you're asking.

Glad you got it fixed.
I did have it installed in that condition (put together the best I could) for about a week. No ses light, no issue with the brakes. I however was told to look for a intake leak for a cause of my smokey starts with a new ccv. I'll report back if this fixed it, because it'd definitely be an intake leak.
Reply With Quote