So dinan runs 30lb injectors at 5bar. I could run 42lb injectors at 3.5bar. This would amount to same flow.

I have both sets of injectors, car has 3.5bar fpr and I have the 5bar fpr sitting at home.

Any recommendations on which setup? Seems to me that if I run lower pressure that reduces strain on lines.

__________________

2001 540i - Orient Blue

M5 bumpers, wheels, mirrors
S/C, water/air IC
A1 Headers, Random Technology Cats, Eissenmann Exhaust
3.15 diff, evosport power pullies
Koni Sports, Eibach Springs/Sway Bars