View Single Post
  #53  
Old 01-05-2012, 09:57 AM
satobaily satobaily is offline
Registered User
Location: Las Vegas, NV
 
Join Date: Dec 2011
Posts: 1
Mein Auto: 2006 650i
Quote:
Originally Posted by Yorgi View Post
Hey guys, if anyone ends up using this DIY and finds any problems or something that was not clear, let me know and I'll modify the DIY.

I also have a 55 page Adobe PDF version if you want to print the DIY. Send me a PM and I'll email it to you. It's 15MB so I cannot post it here as an attachment.
Yorgi, excellent, excellent write up! Many thanks for your time and efforts in producing this. I used it the other day and have the following comments:

1. The front brake rotors on the 650 come off easily without removing the caliper carrier. You just rotate them out after pulling them as far forward as you can. They go on easily the same way.

2. Getting your hand behind the box which houses the front brake sensor connector to release the latch was impossible for me. So I used a small screw driver and put it between the "loop" that makes up the latch. This made it easy.

3. The part number on the Permatex Ceramic Extreme Brake Lubricant is actually 24124, not 24125 as you have listed.

Other than that, your DIY was perfect. Outstanding! And, again, thank you.
Reply With Quote