View Single Post
  #8  
Old 02-08-2012, 08:08 AM
usaret usaret is offline
Officially Welcomed to the 'Fest
Location: All Over
 
Join Date: Feb 2012
Posts: 918
Mein Auto: A Gamma Goat
Quote:
Originally Posted by Cloudy View Post
I have not blocked the tube or capped it, just I clipped the power to the motor, I assumed no more fluid would siphon out, and hasn't for the last 24hrs, is that ok or should I be capping the pump outlet?
Unplugging the power will not keep washer fluid from flowing through the pump. You need to disconnect the line at the pump and cap it with something. There is no need to block the tube that you unplug. You can just tie it to the wiring harness to keep it out of the way.

Last edited by usaret; 02-08-2012 at 08:09 AM.
Reply With Quote