View Single Post
  #9  
Old 02-09-2012, 09:07 AM
PeterVanstone PeterVanstone is offline
PeterVanstone
Location: Southampton UK
 
Join Date: Jan 2012
Posts: 3
Mein Auto: BMW X3 3.0 M
Hope this helps - my rear washer stopped working recently because the pipe had blown off the back of the spray nozzle that is set in the rear spoiler on the top of the tailgate. It blew off because the nozzle frove and the pressure pushed the pipe off the back of the nozzle. No water comes in the car and it can run down the sides of the tailgate so it's difficult to see. I couldn't see the water that was pumping out into the spoiler. It is easy to remove the spoiler - one row of bolts are behind round bungs and to get to the others you need to take off the trim around the tailgate window. The trim pulls straight off starting at the bottom on one or other side, but the clips can be tight and you need to be as careful as possible to avoid any breakage!
Reply With Quote