Bimmerfest - BMW Forums - View Single Post - Unable To Bleed Cooling System
View Single Post
Old 04-04-2012, 04:02 PM
paulie710 paulie710 is offline
Registered User
Location: NJ
Join Date: Jan 2012
Posts: 22
Mein Auto: 750il
Unable To Bleed Cooling System

Recently i changed the radiator etc on my 99 750 V12 bled it by trurning the key on...hearter on low .opened bleeder on resiovor and filled radiator kept filling it until it was full and almost all bubbles out from the bleeder...closed up bleeder /cap . and took it for a ride ..did this several times over the couse of a week i still have an eractic temp gauge while driving .It will shoot to almost pinned then back down to normal......
The funny thing is i can let this car idle for over and hour and the temp wont budge past normal......but after a few miles of driving the gauge will go from normal to pinned the back again several times!!! this is making me nuts !!! Any help would be gratly appreciated

ps Listed below are the parts that i recently changed
both coolant senders
upper hose
clutch fan w/fan and shroud
Reply With Quote