Got this sucker on. Just gotta hook up the ccv (hose is being stubborn) and tighten it down. also, sport seats are installed, and exhaust is ready to be bolted back on.
Tomorrow: oil filter housing and vanos line are replaced. Multiple items powder coated. Bumper gets clear coated. Fan shroud will hopefully be made. New gasket for the Tstat housing and such (was leaking slightly). Debating on whether to powder coat the housing or not. If everything goes to plan, I should be able to start re assembly and wire tuck. Few more wires to fix and shrink and the rest should be easy.
RIP Ben "Jever" Doebele, we wont forget you
Please, call me Chadley
1997 328iS... HR coilovers, Brembo F40 calipers, camber plates, it needs a CUMMINS!!
1990-somethin Chevy K3500... Cummins, cab swap, 5 speed, and lots of motor work. 20 MPG, 40 PSI, 507 ft/lbs torque