View Single Post
  #52  
Old 04-23-2012, 07:30 AM
cssnms cssnms is offline
Officially Welcomed to the 'Fest
Location: Murland
 
Join Date: Jan 2011
Posts: 715
Mein Auto: '11 335d
Quote:
Originally Posted by Stugots View Post
Limp mode can happen, yes. Running Map 3 at Stage 7 (30%) will trigger limp almost 100% reliably under WOT. Depending on conditions, Map 3 Stage 6 (20%) will do the same (interestingly enough, only under intense acceleration going from 2nd to 3rd).

I can reliably run Map 3, Stage 5 (10%) without concern for limp, and a massive increase in power and torque.
Quote:
Originally Posted by Stugots View Post
Baseline for my car was 245bhp. JBD yielded 308bhp, DTUK Program 3 Map 7 yielded the 365HP.



JBD at 100% and DTUK @ Program 3 Map 7.
Quote:
Originally Posted by Stugots View Post
Program 3 Map 7 can, and more often than not, will trigger limp and SES...it is very, very aggressive, and only seems to be content on very cool days.
So if program 3 and map 7 more often than not triggers limp/ses lights I see that setting as virtually unusable, despite the impressive gains on a dyno.

So I have distilled this down to program 3, map 5 is the useable setting, in which case I would be interested in seeing the hp/torque gains under this setting as compared to the JBD at 100%. I am guessing they are very similar.

Last edited by cssnms; 04-23-2012 at 07:33 AM.
Reply With Quote