05-17-2012, 03:28 PM
|
|
Officially Welcomed to the 'Fest
Location: Miami
|
|
Join Date: Aug 2011
Posts: 156
Mein Auto: BMW 545i
|
|
Quote:
Originally Posted by mfumbesi
Please do post them. I'm intrigued.  |
Here u go. I would start from left to right. Attack the first zip tie around the metal hinge thing.(If you look right between the two exhaust pipes you will see it)
Tie the second zip tie around the bell just like I did in the picture.
Tie the third one around the lever of the exhaust valve.
First leave them loose so you can play with them, then tighten them one by one and make sure the last zip tie around the lever does not slip off. Once the zip ties are tight, you must push the lever inward as far as you can and you will hear the valve open. Once you push the lever all the way in tighten the zip tie as much as you can.
Goodluck
|