View Single Post
  #1  
Old 06-26-2012, 02:11 AM
PAPER's Avatar
PAPER PAPER is offline
CRISP & CLEAN
Location: on the moon
 
Join Date: Jul 2009
Posts: 3,008
Mein Auto: Ford Pinto
Here are logic 7 repair instructions for every 1

OK I AM NoT TAKING ANY CREDIT FOR THIS .
I FOUND IT WHILE READING ON A GERMAN FORUM .

HERE IS A COPY & PASTE OF THERE INSTRUCTIONS WITH PIC'S
DO AT YOUR OWN RISK !!!



Repair instructions and ASK Logik7 from the E65!
Good day,

as you all know I am going to repair a defective Logik7.
I just wanted to show my work and presentieren because of the many questions that I'm not yet as far : Thumbsup:
Come rare in the hobby room at my in-laws.

Picture # 1: Here's the Logik7 board, you see four stages
1x Center speaker
1x both rear doors
1x bass left
1x bass right
Picture # 2: I've removed the old broken amplifiers and exposed contacts.
Image No. 3: The same close-up
Picture # 4: These two stages are to replace the old
Picture # 5: I was looking something Sprittig ;-)) do not have hands trembled, but I did not want to hide from you!

I
I also soldered the amp already part way to the board (or
no photo), for the speakers I have 0.5 mm thick and 3cm long lines used for
the signals of the thin black? mm .

Will keep you here with that Fred up to date.

mfg odd ....

Edit of 19/03/2012: As I already wrote yesterday, I was
sprittig something and so I said instead of 0.5mm , 1.5mm to
the TDA soldered ;-( (Now I know why it was so hard * LOL *

This will, of course, correct and add new pictures!
Attached Thumbnails
Click image for larger version

Name:	IMG_0123 (Large).JPG
Views:	5052
Size:	99.3 KB
ID:	330626   Click image for larger version

Name:	IMG_0124 (Large).JPG
Views:	4355
Size:	98.5 KB
ID:	330627   Click image for larger version

Name:	IMG_0126 (Large).JPG
Views:	3919
Size:	100.9 KB
ID:	330628   Click image for larger version

Name:	IMG_0130 (Large).JPG
Views:	4877
Size:	112.3 KB
ID:	330629   Click image for larger version

Name:	IMG_0131 (Large).JPG
Views:	4624
Size:	90.6 KB
ID:	330630  


Last edited by PAPER; 06-26-2012 at 03:32 AM.
Reply With Quote
Advertisement