View Single Post
  #2  
Old 07-02-2012, 02:04 AM
edgar526 edgar526 is offline
Registered User
Location: USA
 
Join Date: Jul 2012
Posts: 3
Mein Auto: BMW Z4
Instructions

1.Purchase an OBD1 jumper harness. Your automotive professional may have such a harness for your system. Alternatively, you can purchase one at many automotive stores. This allows you to convert your OBD2 to an OBD1 system.
2.Locate the OBD2 in your vehicle. It should be within three feet of the steering wheel. Examples would be under the dash, in front of the passenger seat, behind the ashtray or in or around the center console.
3.Locate the ICM (Ignitor) input port. Connect the yellow and green wire from the jumper harness into it.
4.Look for the CKP (Crank Position) input. Attach the light blue and white wires into it. Insert the yellow and black wires into the CYP (Cylinder Position) inputs.
5.Locate the TDC (Top Dead Sensor) input ports. Insert the green and red wires into those ports.
6.Plug the dark blue wire into the RPM Lead Signal input ports. Attach the black and yellow wires to the remaining RPM ports.
Reply With Quote