View Single Post
Old 07-09-2012, 02:54 PM
Norm50 Norm50 is offline
Registered User
Location: Alberta
Join Date: Nov 2011
Posts: 72
Mein Auto: X3
Originally Posted by Ian Sanford View Post
I would like the ability to vary the time before the stop/start kicks in. I find that sometimes I pull up at a junction or roundabout and have to stop for a couple of seconds and the engine dies just as I want to pull away which can be dangerous. I have no problem with the engine switching off if I am waiting for more than, say, 10 seconds in a queue of traffic but the default setting is too short - what do others feel?
I've experienced the exact same issues as you and would like it if there was a longer delay before it activated or if the engine didn't shut down if the signal light is on. The other thing that concerns me is needlessly shutting a hot engine down all of the time and the affect that my have on the turbo's extremely hot bearings where the flow of cooling oil is constantly interrupted.

Last edited by Norm50; 07-09-2012 at 02:57 PM.
Reply With Quote