View Single Post
  #1  
Old 07-31-2012, 06:32 AM
Loganxxx Loganxxx is offline
Registered User
Location: Brazil
 
Join Date: Jul 2012
Posts: 4
Mein Auto: Z4 3.5i
Installing a IDRIVE on a Z4 3.5i

First of all, let me say congrats to this great and very usefull forum.

I just got myself a 2010 z4 3.5i with 8k km here in Brazil.
I didn't come with the Idrive.
I've got this kit from ebay:
BMW e89 Z4 CIC navigation HDD iDrive navi monitor
FULL UPGRADE SET PRECODED AND HARDWARE ACTIVATED.

So far so good.....

As i got the kit here, i cannot fit it in the dash board or could not find the places to plug the screen and the Idrive Joystick into the CIC.
Here are some pictures so you can see it.

I've asked the seller about it....and the frist follow up is that i have ti "adapt" the dash to fit the new CIC....Nothing was told about were to plug the screen and joystick.

The question is:
- Is really needed to adapt the CIC or he sended me the wrong piece?
- If this is the write CIC and i'm messing up the connections, is it worth to "adapt" the dash? (adapting means completely cut and glue the original dash from the inside....)


Well, that's my sad history so far....looking for a happy ending.

Cheers

Obs: On the last picture, you can see that one of the brackets came out broken.
Attached Thumbnails
Click image for larger version

Name:	DSC01349.jpg
Views:	294
Size:	122.3 KB
ID:	334987   Click image for larger version

Name:	DSC01348.jpg
Views:	267
Size:	80.8 KB
ID:	334988   Click image for larger version

Name:	DSC01347.jpg
Views:	236
Size:	84.9 KB
ID:	334989   Click image for larger version

Name:	DSC01346.jpg
Views:	219
Size:	90.6 KB
ID:	334990   Click image for larger version

Name:	DSC01345.jpg
Views:	314
Size:	112.9 KB
ID:	334991  

Click image for larger version

Name:	DSC01344.jpg
Views:	241
Size:	121.4 KB
ID:	334992  

Last edited by Loganxxx; 07-31-2012 at 07:08 AM.
Reply With Quote
Advertisement