View Single Post
  #53  
Old 09-15-2012, 10:58 AM
Pops Z4 Pops Z4 is offline
Registered User
Location: Rhode Island
 
Join Date: Mar 2012
Posts: 11
Mein Auto: 2005 Z4 3.0i
New Motor Markings -Z4 Hydraulic Connections Differ

Re: How to Remove your Soft Top.....56k Beware
by ****ah - Sat Nov 12, 2011 11:55 pm

use the version from old markings, trust me, Pipe the new pump up the same way as the old one was and you will be fine, The new markings are incorrect.
==========================


Found this post from a few years back concerning the difference between the 05 motor and the new one I just picked up form BMW. So on a Saturday afternoon with no one at BMW to answer my question, what have you guys done? Use the configuration from the old pump including the same wire connections as noted above or change the connections ports to the new markings.

Thanks for Shipkiller the removal was less challenging that expected. When you get to those two clips over the fender wells, take an old screw driver heat the end to make a small pry bar, worked great. My Dad make one years ago, has bailed me out some may time I cannot count. Great little pry bar, about 6 inched long with a narrow blade.

Back to the motor, any thoughts? Waiting for BMW or a post from the forum.
Reply With Quote