View Single Post
  #2  
Old 09-19-2012, 12:49 PM
paperplane94 paperplane94 is offline
Officially Welcomed to the 'Fest
Location: Los Angeles, CA
 
Join Date: Jan 2012
Posts: 933
Mein Auto: 1989 525i M20B25
Quote:
Originally Posted by countycop911 View Post
I have a 1995 540i and it appears my Blower Motor may be out, does not work on any speed settings. Before it stopped working completely it seemed to be running slower than normal on all speeds. Additionally when it first stopped working, periodically it would come on however that behavior has stopped. From reading other comments I am lead to believe it is not the Resistor, hopefully because the new Motor is on its way. Nevertheless my question is does anyone know if the cabin filter can be replaced thru the engine compartment when I am replacing the Blower Motor? Sounds like a good opportunity if possible. Lastly concerning the Resistor I have seen threads out here where some 95' 540i's do or do not have the Blade-Type installed. On some websites when attempting to order a Resistor, the site would lead me either or both types. Thanks in advance for your help.
No, the cabin filter must be accessed the good ol fashioned way through the glovebox.

for help:
http://www.nmia.com/~dgnrg/page_15.htm
Reply With Quote